Where to set timing?

furnitureguy-123 · Post by **furnitureguy-123** » Fri Jun 05, 2009 8:45 am

Good morning!!
I have a 1966 flairside with a 1980 300-6, running on a 1968 distributor!!!!
I have set the timimg at 6btdc, and adjusted just a bit by ear and idle rpms.
I still have an intermittent miss and was wondering if anybody had the specs for setting the timing. I will take the numbers for an 80 or a 68 and then adjust from there.
Some day I will find a 66 300 and stop needing 3 or 4 books.

montana_hiboy · Post by **montana_hiboy** » Fri Jun 05, 2009 11:54 am

furnitureguy-123 wrote:Good morning!!
I have a 1966 flairside with a 1980 300-6, running on a 1968 distributor!!!!
I have set the timimg at 6btdc, and adjusted just a bit by ear and idle rpms.
I still have an intermittent miss and was wondering if anybody had the specs for setting the timing. I will take the numbers for an 80 or a 68 and then adjust from there.
Some day I will find a 66 300 and stop needing 3 or 4 books.

You'll like this site....http://fordsix.com/index.php

The FORDification.com Forums

Where to set timing?

Where to set timing?

Re: Where to set timing?