#19 - Nov. 26, 2007
- FORDification
- Site & Forum Admin
- Posts: 8050
- Joined: Sun Jul 11, 2004 12:52 am
- Location: Kansas, Wellsville
- Contact:
#19 - Nov. 26, 2007
OK, here's one that might make you think for a few minutes. Identify the proper application for these:
____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
- lightning_msd
- Preferred User
- Posts: 403
- Joined: Sun Nov 19, 2006 2:57 pm
- Location: Medicine Hat, Alberta, Canada
- Contact:
re: #19 - Nov. 26, 2007
small block ford
1967 F100 "Lexxi" 352
http://www.fordification.com/galleries/ ... ?album=482
http://www.fordification.com/galleries/ ... ?album=482
- FORDification
- Site & Forum Admin
- Posts: 8050
- Joined: Sun Jul 11, 2004 12:52 am
- Location: Kansas, Wellsville
- Contact:
re: #19 - Nov. 26, 2007
____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-
- New Member
- Posts: 32
- Joined: Thu Mar 23, 2006 9:51 am
- Location: Mississippi, Sarah
re: #19 - Nov. 26, 2007
Those are left and right engine perches for the FE engines 352-360-390.
- FORDification
- Site & Forum Admin
- Posts: 8050
- Joined: Sun Jul 11, 2004 12:52 am
- Location: Kansas, Wellsville
- Contact:
re: #19 - Nov. 26, 2007
Nope...keep trying!
____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
- FORDification
- Site & Forum Admin
- Posts: 8050
- Joined: Sun Jul 11, 2004 12:52 am
- Location: Kansas, Wellsville
- Contact:
OK, I'll give you half-credit for that....what's the application? What vehicles?Darrman wrote:300 I6 perches?
____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
- theskytoucher
- Preferred User
- Posts: 471
- Joined: Wed Jun 07, 2006 2:53 pm
- Location: Arizona, Cottonwood
- Contact:
-
- New Member
- Posts: 32
- Joined: Thu Mar 23, 2006 9:51 am
- Location: Mississippi, Sarah
re: #19 - Nov. 26, 2007
The 67-72 4wd's with I-6.
- basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
re: #19 - Nov. 26, 2007
Keith,
Are they 300 mounts for a dentside, (73-79 F-100).
I had a 74' that had a 300 with a 3 on the tree, kinda look like those.
Jeff
Are they 300 mounts for a dentside, (73-79 F-100).
I had a 74' that had a 300 with a 3 on the tree, kinda look like those.
Jeff
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
- FORDification
- Site & Forum Admin
- Posts: 8050
- Joined: Sun Jul 11, 2004 12:52 am
- Location: Kansas, Wellsville
- Contact:
re: #19 - Nov. 26, 2007
Hmmm....well, we're ALMOST there!
OK, I'll give you 1/4 credit for that. However....not all dentside 300ci engine perches are the same. Can you be more specific?
OK, I'll give you 1/4 credit for that. However....not all dentside 300ci engine perches are the same. Can you be more specific?
____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
- FORDification
- Site & Forum Admin
- Posts: 8050
- Joined: Sun Jul 11, 2004 12:52 am
- Location: Kansas, Wellsville
- Contact:
re: #19 - Nov. 26, 2007
Yes!
These are the I6 (300) stands from a '79 F150 2WD. The front crossmember was redesigned on the 2WD trucks in mid-'77, so the '65 thru '77-1/2 pieces are different from the '77-1/2 thru '79 pieces and are not interchangeable.
Keep that in mind, too! If you're looking for engine perches to do an engine swap, you can't use the '77-1/2 and newer parts...they won't fit our crossmember.
These are the I6 (300) stands from a '79 F150 2WD. The front crossmember was redesigned on the 2WD trucks in mid-'77, so the '65 thru '77-1/2 pieces are different from the '77-1/2 thru '79 pieces and are not interchangeable.
Keep that in mind, too! If you're looking for engine perches to do an engine swap, you can't use the '77-1/2 and newer parts...they won't fit our crossmember.
____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
- cghstrojan08
- Blue Oval Fan
- Posts: 562
- Joined: Sun Jan 01, 2006 7:28 pm
- Location: Toledo, OH
re: #19 - Nov. 26, 2007
Oh. Knew they were engine perches but that was it.
ROBERT
Member #1076
1968 F100 SWB 360
1969 F100 LWB 360 "Ol' Blue" - Sold
1976 F350 Trailer Special, Extended Wheel base, 460
http://s9.photobucket.com/albums/a75/cg ... ld%20Blue/
Member #1076
1968 F100 SWB 360
1969 F100 LWB 360 "Ol' Blue" - Sold
1976 F350 Trailer Special, Extended Wheel base, 460
http://s9.photobucket.com/albums/a75/cg ... ld%20Blue/