LMC Truck
Moderator: FORDification
- Big D's 69
- Blue Oval Guru
- Posts: 1089
- Joined: Wed Mar 22, 2006 2:32 pm
- Location: Georgia, Commerce
I work at Year One Inc and we don't have a minimum order amount but we have a $8.50 minumum shipping fee. That really sucks if all you need is a $4.00 decal.
1969 Ford F-100. 302 4 barrel, C4 auto, 9in 3.50 open rear, headers, power steering, Turq/wht, Under restoration. In other words, in a million pieces!!!
There is no Replacement for Displacment!!!
My Photo Gallery: http://www.fordification.com/galleries/ ... ?album=655
There is no Replacement for Displacment!!!
My Photo Gallery: http://www.fordification.com/galleries/ ... ?album=655
- FLASH 1
- New Member
- Posts: 227
- Joined: Thu Jun 09, 2005 8:26 pm
- Location: North Carolina, Reidsville
re: LMC Truck
Just wanted to let other people know that LMC is not the only people that deals in Ford Trucks & they think they might know something about a truck but they are far from it, read some of there fine print like ask a mechanic, don't ask us tells me that they are mail order & would not know a Tech. answer to a ? if it bit them in the but... , We might not know all of it but I know it will be better than LMC'S Solution & be a better product than some of there Tawain items I have seen them putting off people that are not aware of them since I have seen so many people think LMC is so great,,, NOT... Just putting my 2 cents in, Tom @
Tom, where Ford Trucks Rule
1956 Big Window
1964 F-750 Flat Bed
1965 M-100 Mercury
1966 M-350 Mercury
1966 F350 Wrecker
1972 F-350 Crew Cab
1997 F-450 7.3 with 85,000 original miles
2006 F-150 Crew Cab
2008 F-650 Crew Cab Roll Back 6.7 Cummins
2020 Flat Top Peterbilt Roll Back PX-7 Engine
and 2 cars 1968 XLT and 2017 Mustang
1956 Big Window
1964 F-750 Flat Bed
1965 M-100 Mercury
1966 M-350 Mercury
1966 F350 Wrecker
1972 F-350 Crew Cab
1997 F-450 7.3 with 85,000 original miles
2006 F-150 Crew Cab
2008 F-650 Crew Cab Roll Back 6.7 Cummins
2020 Flat Top Peterbilt Roll Back PX-7 Engine
and 2 cars 1968 XLT and 2017 Mustang
-
- New Member
- Posts: 6
- Joined: Tue Jun 07, 2005 6:34 pm
- Location: Montana, Helena
re: LMC Truck
I have ordered some parts from LMC in the past and they were ok. One of the things I ordered was a windshield washer resevoir about 2 years ago. I recieved a nice NOS genuine Ford part. A couple of months ago I ordered the identical washer res for another truck and got an aftermarket reproduction made in Thailand for the same amount of $. This time the washer pump would not fit in the res. I modified the pump to fit, but I cant get the damn thing to stop leaking.
Bottom line, be wary and ask whether or not the parts are offshore repro, NOS oem, or on shore repro using original tooling. I guess I like NPD better than LMC because they will tell you what you are getting.
Bottom line, be wary and ask whether or not the parts are offshore repro, NOS oem, or on shore repro using original tooling. I guess I like NPD better than LMC because they will tell you what you are getting.
- FORDification
- Site & Forum Admin
- Posts: 8050
- Joined: Sun Jul 11, 2004 12:52 am
- Location: Kansas, Wellsville
- Contact:
re: LMC Truck
I was watching a cartoon with my boys this evening, and it was a 3 Stooges cartoon. Larry, Moe and Curly were standing side-by-side with the first letter of their names on the front of their shirts, so when they were standing there it spelled out LMC.
Hmmmm....makes you wonder, doesn't it?
Hmmmm....makes you wonder, doesn't it?
____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
- flyboy2610
- 100% FORDified!
- Posts: 4901
- Joined: Sun Oct 03, 2004 6:42 pm
- Location: Nebraska, Lincoln
re: LMC Truck
"If the women don't find you handsome, they should at least find you handy."
Red Green
If you're going to live like there's no hell...............
you'd better be right.
http://theworldasiseeit-flyboy2610.blog ... ee-it.html
Red Green
If you're going to live like there's no hell...............
you'd better be right.
http://theworldasiseeit-flyboy2610.blog ... ee-it.html
- Big D's 69
- Blue Oval Guru
- Posts: 1089
- Joined: Wed Mar 22, 2006 2:32 pm
- Location: Georgia, Commerce
Well I just placed a little over $1200 dollar order and everything was in stock. SO if there shipping and quality of parts is as good as there sales rep I have found me a place to order parts. Will let you know how things go.
1969 Ford F-100. 302 4 barrel, C4 auto, 9in 3.50 open rear, headers, power steering, Turq/wht, Under restoration. In other words, in a million pieces!!!
There is no Replacement for Displacment!!!
My Photo Gallery: http://www.fordification.com/galleries/ ... ?album=655
There is no Replacement for Displacment!!!
My Photo Gallery: http://www.fordification.com/galleries/ ... ?album=655
- flyboy2610
- 100% FORDified!
- Posts: 4901
- Joined: Sun Oct 03, 2004 6:42 pm
- Location: Nebraska, Lincoln
I have ordered from LMC and I don't have any complaints.
I have heard their armrests are junk, and that it's best to get those from Carpenter. But I was happy with the stuff I got from LMC.
I have heard their armrests are junk, and that it's best to get those from Carpenter. But I was happy with the stuff I got from LMC.
"If the women don't find you handsome, they should at least find you handy."
Red Green
If you're going to live like there's no hell...............
you'd better be right.
http://theworldasiseeit-flyboy2610.blog ... ee-it.html
Red Green
If you're going to live like there's no hell...............
you'd better be right.
http://theworldasiseeit-flyboy2610.blog ... ee-it.html
- Big D's 69
- Blue Oval Guru
- Posts: 1089
- Joined: Wed Mar 22, 2006 2:32 pm
- Location: Georgia, Commerce
Well I got my order yesterday and am very impressed. THe service was great, got it in two days and the parts were packed great. Might have been an over kill, but it was a sheetmetal piece so all is good. I will defiante'y be ordering from them again in the future. I highly recommend them!!!!
1969 Ford F-100. 302 4 barrel, C4 auto, 9in 3.50 open rear, headers, power steering, Turq/wht, Under restoration. In other words, in a million pieces!!!
There is no Replacement for Displacment!!!
My Photo Gallery: http://www.fordification.com/galleries/ ... ?album=655
There is no Replacement for Displacment!!!
My Photo Gallery: http://www.fordification.com/galleries/ ... ?album=655
-
- New Member
- Posts: 170
- Joined: Wed Aug 11, 2004 1:20 am
- Location: Texas, Crockett
-
- New Member
- Posts: 170
- Joined: Wed Aug 11, 2004 1:20 am
- Location: Texas, Crockett
- Galaxie64
- New Member
- Posts: 203
- Joined: Tue Mar 21, 2006 11:51 pm
- Location: Wyoming
I finally ordered my tank sender unit and a gas cap from LMC and was impressed with the 2 days shipping, everything seems ot be in order and I got it about a week faster than I thought I would.
'68 F150 2wd
'72 F250 2wd Camper Special (400/C6/4bbl)
'64 Galaxie 500 (3524bbl/57K miles)
'92 Grand Marquis (mostly stock 4.6L)
'97 F150 (heavily modded 5.4L)
'48 F1 (Flat 6)
'51 F3 (Flat V8 )
'56 F350 (engineless)
** Chuck Norris has counted to infinity -- twice. **
'72 F250 2wd Camper Special (400/C6/4bbl)
'64 Galaxie 500 (3524bbl/57K miles)
'92 Grand Marquis (mostly stock 4.6L)
'97 F150 (heavily modded 5.4L)
'48 F1 (Flat 6)
'51 F3 (Flat V8 )
'56 F350 (engineless)
** Chuck Norris has counted to infinity -- twice. **
-
- New Member
- Posts: 12
- Joined: Sun Feb 26, 2006 8:50 pm
I've never had a problem with LMC and I don't know where people get the idea that there parts are crappy.
In my last order, 3 steering column parts were in dennis carpenter packages (and they cost less than getting from dennis carpenter) and the sway bar links were OEM ford parts with ford part# labels and revision #s
In my last order, 3 steering column parts were in dennis carpenter packages (and they cost less than getting from dennis carpenter) and the sway bar links were OEM ford parts with ford part# labels and revision #s
- Galaxie64
- New Member
- Posts: 203
- Joined: Tue Mar 21, 2006 11:51 pm
- Location: Wyoming
I installed my gauge sender tonite and it all went together and works great.
'68 F150 2wd
'72 F250 2wd Camper Special (400/C6/4bbl)
'64 Galaxie 500 (3524bbl/57K miles)
'92 Grand Marquis (mostly stock 4.6L)
'97 F150 (heavily modded 5.4L)
'48 F1 (Flat 6)
'51 F3 (Flat V8 )
'56 F350 (engineless)
** Chuck Norris has counted to infinity -- twice. **
'72 F250 2wd Camper Special (400/C6/4bbl)
'64 Galaxie 500 (3524bbl/57K miles)
'92 Grand Marquis (mostly stock 4.6L)
'97 F150 (heavily modded 5.4L)
'48 F1 (Flat 6)
'51 F3 (Flat V8 )
'56 F350 (engineless)
** Chuck Norris has counted to infinity -- twice. **
- Big D's 69
- Blue Oval Guru
- Posts: 1089
- Joined: Wed Mar 22, 2006 2:32 pm
- Location: Georgia, Commerce
Well I placed another fairly large order last night from LMC so as long as I have as great of service as last time there will be no complaints.
1969 Ford F-100. 302 4 barrel, C4 auto, 9in 3.50 open rear, headers, power steering, Turq/wht, Under restoration. In other words, in a million pieces!!!
There is no Replacement for Displacment!!!
My Photo Gallery: http://www.fordification.com/galleries/ ... ?album=655
There is no Replacement for Displacment!!!
My Photo Gallery: http://www.fordification.com/galleries/ ... ?album=655