Has anyone ever replaced one of these with a C-Clip or an E-ring? 68 F100 3OTT
https://www.autokrafters.com/images/Pro ... e/6997.jpg
Shift Rod C-Clips
Moderators: FORDification, 70_F100
-
sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: Shift Rod C-Clips
I have. Got an E-clip from the parts store. Harder to put on though. Gotta compress the rubber bushings quite a bit. I used 2 pair of small vise grips, one on either side to squeeze, compress and hold the rubber bushing while I installed the E-clip. Same principle works installing the stock clip in your link.
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
-
jaderose
- New Member
- Posts: 4
- Joined: Fri Jul 22, 2016 6:34 pm
Re: Shift Rod C-Clips
Thank you very much. I appreciate the info!
-
MAK
- Blue Oval Fan
- Posts: 527
- Joined: Tue Dec 21, 2004 9:35 am
- Location: Georgia, Blairsville - Florida, Flagler Beach
- Contact:
Re: Shift Rod C-Clips
I’ve had mine pop off on multiple occasions. I plan on seeing if I can drill drill a small hole in the rod and use a cotter pin when I finally get mine reassembled.