bumps with lowered altitude!! (lots of great custom bumps!!)

[quantumleap]

i can deffinately turn a wrench and use a measuring tape and level along the way. i just dont have air tools, engine hoist, or welder.

[marz68]

If you can have everything that is needed, it wont take to long. I can make the brackets for the LCA ahead of time just to have them ready for welding. A torch will also make things go faster for that stock cross member. a cutting wheel and a sawsall will work but will take much longer. I can also talk to my friend that im building the frame for if he would let us swap out frames since he wont be using his any time soon?

[fomocoguy]

Saw this lowered 72 crew on ebay today. Pretty cool!
http://cgi.ebay.com/ebaymotors/1972-for ... edcrew.jpg[/img]

[quantumleap]

that truck has some nice qualities about it. that would make a real nice boat hauler.

[elgemcdlf]

For those that are against the CV swap because you can't get it low enough. The crew is running a '03 CV swap.

[marz68]

Change the wheels then i'll like it more. It must ride like crap with those small bag shock waves in the front.

elgemcdlf, good point.

[flyboy71]

[07JR450]

just got my new wheels on this past week looks great in my opinion . let me knoe what yal think about it

[chepdog1]

Hey that looks very clean, i like the old surface rust look look with the new school rims, what brand/size rims/tires are those? Thanks

[07JR450]

THANKS THEY ARE BOSS 338'S WITH 18X8 UP FRONT AND 20X10 OUT BACK NOT SURE THE BACK SPACING IVE GOT A 1.5 INCH SPACER IN THE REAR

[BobbyFord]

My cousin's truck...

[Dr Casti]

td I was wondering what kind of suspension set up are you running I like the stance of your truck.


As for marz 68 that is one hell of setup

i am using DJM-3''beams with 1 round out of the factory coils. out back i just flipped the front spring hangers upside down and removed one leaf, and added shims to correct the pinion angle.

Hello all you guys!
Been following all your posts and let me tell you your trucks are awesome. It gets me that old feeling of envy
Excellent thread, keep on rocking!

I have a 69 F-250 camper special and i would like to lower it a bit, maybe 2 inches front and 3 rear. I´ve called Summit and they are not sure those kits will fit the F-250, so i don´t want to purchase anything and later need to exchange/return it.
So, What are your recommendations and the easy way (i´m running short on funds) to lower this 69 F-250?. You don´t see too many F-250 lowered....anyone?

Thanks in advance!
BTW marz68......thank your for your reply ! Gona do this

[marz68]

My cousin's truck...
[ Image ]

Nice!!

[Jaustin]

Here is a picture of my truck with the lowering arms installed, I also did a disc brake conversion at the same time. Now all i need is to get new coils since the driver side is about a half an inch lower.

[1971 F100]

Here is a picture of my truck with the lowering arms installed, I also did a disc brake conversion at the same time. Now all i need is to get new coils since the driver side is about a half an inch lower.

Looks good with the front down.