1972 F250 Valence Panel
Moderator: FORDification
-
bdk731
- New Member
- Posts: 7
- Joined: Fri Nov 13, 2009 12:25 pm
1972 F250 Valence Panel
Need a little help. I am looking for a template that shows where to drill the mounting holes in the valence panel for 1972 F250 parking lights as teh holes are not pre-drilled on new panel. Any help would be appreciated.
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: 1972 F250 Valence Panel
Don't know that you'd ever find a template, (unless you had another sitting beside it to use as a gauge)?"bdk731"Need a little help. I am looking for a template that shows where to drill the mounting holes in the valence panel for 1972 F250 parking lights as teh holes are not pre-drilled on new panel. Any help would be appreciated.
But I'll bump your post back to the top in hopes someone else has one sitting around not installed to measure from.
Picture for reference:
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4