trans question in 67 f100
Moderators: FORDification, 70_F100
- Junior Knight
- New Member
- Posts: 172
- Joined: Tue Oct 05, 2010 5:21 pm
- Location: Eustace Texas
trans question in 67 f100
I have a cruse-a-matic in my 67..in shifts smooth but fast...before I get to a good speed, its in high gear. Is this normal?
1967 Ford F-100...goin back *STOCK*..just sayin
Re: trans question in 67 f100
It is for my F250 with a C6.
If I romp on it it will down shift. How about yours?
If I am accelerating with a heavy foot it will stay in lower gears longer, but if I'm just being gentle, it shift into high almost right away.
If I romp on it it will down shift. How about yours?
If I am accelerating with a heavy foot it will stay in lower gears longer, but if I'm just being gentle, it shift into high almost right away.
- BobbyFord
- 100% FORDified!
- Posts: 5373
- Joined: Sun Feb 04, 2007 9:52 am
- Location: Chatsworth, California
Re: trans question in 67 f100
You can adjust the modulator valve by removing the vac hose and inserting a small screwdriver into the vac nipple. Clockwise will lengthen the shift pattern, counter-clockwise will shorten the shift pattern.
- basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: trans question in 67 f100
Like 1/4 to 1/2 a turn then test drive if memory serves me correct.
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
- Junior Knight
- New Member
- Posts: 172
- Joined: Tue Oct 05, 2010 5:21 pm
- Location: Eustace Texas