LMC doors
Moderator: FORDification
- nytreeman
- New Member
- Posts: 66
- Joined: Sat Feb 02, 2008 2:49 pm
- Location: Central NY
LMC doors
This wasnt for a bump but for a 79 Bronco I bought it had brand new LMC doors,chinese aftermarket of course,when I purchased it,they had just been put on when I bought it,after a month they totally seperated at the skin seams in the front,both doors did this now they hang and hit the latches every time you close them.Myself I had previously bought aftermarket parts from Mills Supply and Bronco Graveyard and had good luck
~ Don
So much rust ... so little time
my gallery- http://www.fordification.com/galleries/ ... ?cat=10447
So much rust ... so little time
my gallery- http://www.fordification.com/galleries/ ... ?cat=10447
- FLASH 1
- New Member
- Posts: 227
- Joined: Thu Jun 09, 2005 8:26 pm
- Location: North Carolina, Reidsville
re: LMC doors
Thats why we sell real doors, saw a customer in Ohio showed me everytime he opened the door the outer skin would come off the inner skin, next the outside Ford door handles would not fit the doors cause the recesss idention was not deep enough had to find Tawain door handles, sorry to hear that and the pain going through this
Tom, where Ford Trucks Rule
1956 Big Window
1964 F-750 Flat Bed
1965 M-100 Mercury
1966 M-350 Mercury
1966 F350 Wrecker
1972 F-350 Crew Cab
1997 F-450 7.3 with 85,000 original miles
2006 F-150 Crew Cab
2008 F-650 Crew Cab Roll Back 6.7 Cummins
2020 Flat Top Peterbilt Roll Back PX-7 Engine
and 2 cars 1968 XLT and 2017 Mustang
1956 Big Window
1964 F-750 Flat Bed
1965 M-100 Mercury
1966 M-350 Mercury
1966 F350 Wrecker
1972 F-350 Crew Cab
1997 F-450 7.3 with 85,000 original miles
2006 F-150 Crew Cab
2008 F-650 Crew Cab Roll Back 6.7 Cummins
2020 Flat Top Peterbilt Roll Back PX-7 Engine
and 2 cars 1968 XLT and 2017 Mustang