Added yet another bump

No tech discussion, please

Moderator: FORDification

Post Reply
User avatar
OldRedFord
Blue Oval Guru
Blue Oval Guru
Posts: 1314
Joined: Tue Jan 29, 2008 11:37 pm
Location: Hull GA
Contact:

Added yet another bump

Post by OldRedFord »

Picked up a 1972 F350 Sport Custom. Has a 11 foot flatbed. 390 and c6 transmission and power steering and brakes. Factory discs up front.

When I brought it home. Used my International 175C loader and a long chain to pull it off the trailer.

https://www.instagram.com/p/Cr9AA4oplUl ... IwNjQ2YQ==

Then I pulled it in the barndominim I'm building and put new brakes on. Replaced everything except the hard lines, master cylinder and booster. At this time I also had new tires mounted. I did end up getting new brake calipers too but didn't take pictures.

https://www.instagram.com/p/Cr9BGnqJ5w0 ... IwNjQ2YQ==


Then I found these neat Holley valve covers. Also decided to replace the mirrors with ones in better shape.

https://www.instagram.com/p/Cr9BVT5pcxJ ... IwNjQ2YQ==

Then a overview of the truck. Had the valve cover off because I thought cylinders 2 and 3 had a bad head gasket. Turns out it was crossed plug wires at the distributor cap. :doh:

https://www.instagram.com/p/Cr9BdssJ0OO ... IwNjQ2YQ==
Tim

1972 F350 flatbed drw c6/390
1967 F600 project truck
User avatar
Gaslight
New Member
New Member
Posts: 72
Joined: Mon Feb 15, 2010 10:46 pm
Location: Camarillo, California
Contact:

Re: Added yet another bump

Post by Gaslight »

All the pictures come up as not available.

Jake
1969 F100 Ranger
Post Reply