1967-72 f100 parting out

Bubi · Post by **Bubi** » Sun Apr 19, 2020 5:31 am

I'm looking for a 3-spoke steering wheel in black.
Little cracks and patina are ok. Please with horn knob or ring.
Also I need an 2-groove crankshaft pulley( 3 bolt Balancer) for my 72' 360 FE Truck.
If anyone have a set of center wheel caps and an jack holder, please make an offer.

If shipping to germany is not possible: I have a warehouse contact in the USA.

Thanks...

Jacob R · Post by **Jacob R** » Thu May 14, 2020 2:05 am

Hey. Just joining in the this conversation... I have a 68 f250 CS... I am looking for black driver side arm rest, dog dish hubcaps, stock radio (doesn't need to work), side moldings (driver side door, driver side front wheel well panel (top and bottom)), "390" emblem, west coast towing mirror MOUNTS... I have the mirrors with the 3 lets, just missing the brackets or mounts that attach the legs to the truck. sorry for the novel, thank you for any help, and I hope all is well.

joeficsit · Post by **joeficsit** » Fri May 15, 2020 2:04 pm

Hello to you.

Any 67 interior parts?

Those damn 67s!

I could really use the ashtray and the radio with surround. (even if the radio doesn't work.) Or at least the ashtray and the radio surround.

Thanks!

Chris.

59yblockf100 · Post by **59yblockf100** » Fri May 15, 2020 8:53 pm

will check on all for you guys

Post by **DuckRyder** » Sun May 24, 2020 6:56 pm

Got a Clutch pedal and Z-Bar mounts for an FE?

For that matter a useable Z-Bar?

NC72crew · Post by **NC72crew** » Sat Feb 13, 2021 12:42 pm

Any chance you have the plastic piece that goes between the brake booster and the firewall for a 72.

derek7871 · Post by **derek7871** » Sun Feb 21, 2021 5:20 pm

I need an upper coil spring retainer for a '71 F100, 2WD. I can't find one anywhere.

Jaddiethelady · Post by **Jaddiethelady** » Fri Aug 20, 2021 9:05 am

Do you happen to have an inline 6 radiator for a 67?

DisneysPatB · Post by **DisneysPatB** » Fri Aug 20, 2021 9:29 am

I am looking for 1970 under the seat jack parts.

Jaddiethelady · Post by **Jaddiethelady** » Fri Oct 01, 2021 7:07 am

Do you happen to have a 1967 inline 6 radiator? It s the smaller version than the big motors have. It’s dimensions are specific to that year. Thanks!

68fe360 · Post by **68fe360** » Fri May 13, 2022 4:20 pm

I'm looking for front spindles, need both sides. I have a 1968 F100 2 wheel drive.

SBR_GUY · Post by **SBR_GUY** » Thu Jun 16, 2022 7:49 pm

I am looking for the accelerator linkage for my 67.

EM3 · Post by **EM3** » Tue Jul 19, 2022 9:41 pm

Looking for a 67 rear view mirror with visor mount. Thx

markbennett · Post by **markbennett** » Thu Oct 06, 2022 9:49 am

I have a 1969 F100 2WD. I want to add a steering stabilizer but this truck has never had one so I need the entire kit including brackets. Moog used to make a SSD20 kit but it is no longer available. I could still buy the damper itself but I need the brackets. Do you have any that would fit?

Ferris95 · Post by **Ferris95** » Sun Nov 13, 2022 5:21 pm

Looking for the air cleaner for a 360/390 2bbl. Also do you have rims and hubcaps for a 68? And maybe the PS gear and pitman arm?

The FORDification.com Forums

1967-72 f100 parting out

Re: 1967-72 f100 parting out

Re: 1967-72 f100 parting out

Re: 1967-72 f100 parting out

Re: 1967-72 f100 parting out

Re: 1967-72 f100 parting out

Re: 1967-72 f100 parting out

Re: 1967-72 f100 parting out

Re: 1967-72 f100 parting out

Re: 1967-72 f100 parting out

Re: 1967-72 f100 parting out

Re: 1967-72 f100 parting out

Re: 1967-72 f100 parting out

Re: 1967-72 f100 parting out

Re: 1967-72 f100 parting out

Re: 1967-72 f100 parting out