wiring for a F600 gauge cluster
Moderator: FORDification
-
Zorm
- Blue Oval Fan
- Posts: 547
- Joined: Tue Apr 14, 2009 1:28 pm
- Location: Pensacola, Florida
wiring for a F600 gauge cluster
Ok, new computer, lost a ton of stuff. Like subj states. I'm putting a stock 600 gauge cluster in a 71. I know most of the wires color code correctly with the 600 connector except for maybe 2?. I did have a pic of the ones needed but like I stated, had a dump of a bunch of good info I had, can anyone help out, thanks.
1971 F250 Camper Special, family owned since 1972
1983 Cherokee, last of the big ones, bought in Italy, family owned since 1998
1965 Corvair Corsa Convertible, 140 engine, 4 speed.
HE guides my path, forgives me when I stray and lights my life
1983 Cherokee, last of the big ones, bought in Italy, family owned since 1998
1965 Corvair Corsa Convertible, 140 engine, 4 speed.
HE guides my path, forgives me when I stray and lights my life
-
bluef250
- Blue Oval Fanatic
- Posts: 924
- Joined: Fri Oct 29, 2004 8:49 pm
- Location: Arizona
Re: wiring for a F600 gauge cluster
Do serveral searchs of f500, f600, cluster wiring.
Schematics of the wiring are in the tech section. https://fordification.com/tech/schematics_h.htm
If I remember correctly (from a post a long time ago) only 2 wires have to be changed if both use gauges. Some clusters have lights and on those, you will need to add additional wires.
The charge indicator gauge (voltage differential gauge) will appear unmoved when active unless wiring size is upsized (fusing is suggested.)
Schematics of the wiring are in the tech section. https://fordification.com/tech/schematics_h.htm
If I remember correctly (from a post a long time ago) only 2 wires have to be changed if both use gauges. Some clusters have lights and on those, you will need to add additional wires.
The charge indicator gauge (voltage differential gauge) will appear unmoved when active unless wiring size is upsized (fusing is suggested.)
-
1968f250429
- New Member
- Posts: 116
- Joined: Wed Sep 08, 2010 10:40 pm
- Location: Kirkland, Az
Re: wiring for a F600 gauge cluster
Here's a diagram I made when I did mine. This it for a full gauge cluster.
Also included Is the crimper and terminal ends I used.
Also included Is the crimper and terminal ends I used.
You do not have the required permissions to view the files attached to this post.