I am going to start clean the ford to get it painted. I am going to start filling in the dents. What is the best filler to use on it. How can I get pits and rusty scratches. Would it be best to just sand the pits to metal and primer them.
Any help would be appreciated
Dings ad pits in body
Moderator: FORDification
-
lolcat
- New Member
- Posts: 2
- Joined: Sat Sep 19, 2020 9:54 am
Dings ad pits in body
You do not have the required permissions to view the files attached to this post.
-
Fordkid68
- Preferred User
- Posts: 310
- Joined: Fri Oct 16, 2020 7:27 pm
- Location: Conneaut Lake, PA.
Re: Dings ad pits in body
You could sand the scratches, or try Eastwood rust-converter. To turn it to bare metal.
Adam
My first truck,
1968 F100 lwb 2wd soon to have a 351w, 5-speed
http://www.fordification.com/forum/view ... 15#p771357
^^Build Thread^^
99 F250 super duty, 7.3 diesel!
04 Subaru Outback (daily driver), with a 2.5l boxer H4
(no other projects, YET!)
"Might be crazy but I ain't dumb"!
My first truck,
1968 F100 lwb 2wd soon to have a 351w, 5-speed
http://www.fordification.com/forum/view ... 15#p771357
^^Build Thread^^
99 F250 super duty, 7.3 diesel!
04 Subaru Outback (daily driver), with a 2.5l boxer H4
(no other projects, YET!)
"Might be crazy but I ain't dumb"!
-
MAK
- Blue Oval Fan
- Posts: 527
- Joined: Tue Dec 21, 2004 9:35 am
- Location: Georgia, Blairsville - Florida, Flagler Beach
- Contact:
Re: Dings ad pits in body
No filler over any amount of surface rust. Will eventually bubble up. Old-school is take it to bare metal and apply filler before primer. These days the preferred method arguably is bare metal followed by epoxy primer and then filler over the epoxy.
If you use a standard etch primer be sure not to leave it out in the elements at all. Standard primer will absorb moisture from the environment and applying the filler over that would be bad.
If you use a standard etch primer be sure not to leave it out in the elements at all. Standard primer will absorb moisture from the environment and applying the filler over that would be bad.