Looking to get back to a 9" in the rear. If I find one, can I change out all the internals so it will match the front spline count as well as gearing? I think the 73 on up have wider spring perches, so I'll be looking for a 67-72. Any thoughts?
Thank you.
9" question
Moderators: FORDification, 70_F100
-
DuckRyder
- Moderator
- Posts: 4925
- Joined: Mon Jul 19, 2004 3:04 pm
- Location: Scruffy City
- Contact:
Re: 9" question
The sky (and your wallet) is the limit...
Gearing is easy just about anything is available for a 9" Spline count 28 and 31 are most common (and only Ford options AFAIK) but it isn't necessary the the axle or pinion spline count match the front.....
Gearing is easy just about anything is available for a 9" Spline count 28 and 31 are most common (and only Ford options AFAIK) but it isn't necessary the the axle or pinion spline count match the front.....
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper