Hi all,
Got sort of an odd question for you guys. I have a T18 out of my 72 F250 on the bench. It definitely isn’t original to the truck, I’ve known that for a while.
The stamped metal tag on the top cover has this part number: D4T3-AAA 2. This means it’s a 1974 Ford part judging by the D4, right? But the weird thing is that reverse is over and down, and there are three separate shift forks in the top cover (ie it shifts reverse directly). Novak says that change didn’t happen until 1979.https://www.novak-adapt.com/knowledge/t ... l/t18-t19/
Here are some pictures of the transmission:
Not sure what the deal is. Maybe this transmission was used on the Delorean
T18 Part Number Question
Moderators: FORDification, 70_F100
- sparky72
- New Member
- Posts: 178
- Joined: Tue May 07, 2019 8:52 pm
- Location: Central CA
T18 Part Number Question
Taylor
1972 F250 Ranger XLT 2wd / 8100 GVW / 390 / T18 / 3.73 D60
1972 F250 Ranger XLT 2wd / 8100 GVW / 390 / T18 / 3.73 D60
- sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: T18 Part Number Question
It's not unusual for a D4T3 part number to be used across multiple years. That just means it began in '74. It could be unchanged up into the 80s and it would still have the same part number.
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
- sparky72
- New Member
- Posts: 178
- Joined: Tue May 07, 2019 8:52 pm
- Location: Central CA
Re: T18 Part Number Question
Seems odd that Ford would keep the same part number despite such a fairly significant change. The top cover and even the casting for the case changed with the different reverse shifting method.sargentrs wrote:It's not unusual for a D4T3 part number to be used across multiple years. That just means it began in '74. It could be unchanged up into the 80s and it would still have the same part number.
Taylor
1972 F250 Ranger XLT 2wd / 8100 GVW / 390 / T18 / 3.73 D60
1972 F250 Ranger XLT 2wd / 8100 GVW / 390 / T18 / 3.73 D60
- sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: T18 Part Number Question
The 1st 4 numbers are a date code. The rest of the part numbers designate the engineering changes.
http://www.fordification.com/tech/partn ... erview.htm
http://www.fordification.com/tech/partn ... erview.htm
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
-
- New Member
- Posts: 76
- Joined: Sat Sep 29, 2012 10:56 am
Re: T18 Part Number Question
I believe Novak's shift pattern information is incorrect--I have also noticed that on their site before. The T18 reverse over & up/down change happened long before 1979. I have been told that it changed in approximately 1973 which might explain your 1974 part number. I do have an original 1976 F100 with a T18 and reverse is over & down.
- sparky72
- New Member
- Posts: 178
- Joined: Tue May 07, 2019 8:52 pm
- Location: Central CA
Re: T18 Part Number Question
That makes a lot of sense. Just need to make sure I get the correct rebuild kit.Red Mercury wrote:I believe Novak's shift pattern information is incorrect--I have also noticed that on their site before. The T18 reverse over & up/down change happened long before 1979. I have been told that it changed in approximately 1973 which might explain your 1974 part number. I do have an original 1976 F100 with a T18 and reverse is over & down.
Taylor
1972 F250 Ranger XLT 2wd / 8100 GVW / 390 / T18 / 3.73 D60
1972 F250 Ranger XLT 2wd / 8100 GVW / 390 / T18 / 3.73 D60