Jacking instruction sticker placement
Moderator: FORDification
-
- Blue Oval Fanatic
- Posts: 852
- Joined: Wed Nov 09, 2016 5:49 pm
- Location: Galion, Ohio
Jacking instruction sticker placement
Easy question - where is the proper placement for the jacking instruction sticker on a 1968 F100?
"Life is a garden - dig it"...........
1968 F100 2wd - Rangoon Red - 360 w/T18 - power steering and brakes
1997 Honda CBR 900RR
1968 F100 2wd - Rangoon Red - 360 w/T18 - power steering and brakes
1997 Honda CBR 900RR
- sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: Jacking instruction sticker placement
https://www.fordification.com/images/70explpics/20.jpg
and if you zoom in on this one, on the inner fender, you get an idea about where. https://www.fordification.com/images/70explpics/17.jpg
The rest of the photos are her in case you want to see the whole truck. She's a beauty! https://www.fordification.com/70explorer_358miles.htm
and if you zoom in on this one, on the inner fender, you get an idea about where. https://www.fordification.com/images/70explpics/17.jpg
The rest of the photos are her in case you want to see the whole truck. She's a beauty! https://www.fordification.com/70explorer_358miles.htm
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
-
- Blue Oval Fan
- Posts: 561
- Joined: Tue Jul 15, 2014 10:28 pm
- Location: Colorado Springs, CO
Re: Jacking instruction sticker placement
The place I have always seen the jack instructions in the junk yard is on the inside of the glove box door. My truck has it inside the glove box as well. It makes more sense to put it where the jack is, and I plan on doing that someday but I believe the correct location is inside the glove box on the inside of the door, so when you open the door you can see it there.
Regards
Regards
1972 F250 Sports Custom 390 FE C6 2WD Dana 60 4:10 gears
-
- Blue Oval Fanatic
- Posts: 852
- Joined: Wed Nov 09, 2016 5:49 pm
- Location: Galion, Ohio
Re: Jacking instruction sticker placement
Well that made it clear as mud........ ...........I guess I can't go wrong on with which spot it's in unless they were on different locations between the 67-69 and 70-72 bumps........
"Life is a garden - dig it"...........
1968 F100 2wd - Rangoon Red - 360 w/T18 - power steering and brakes
1997 Honda CBR 900RR
1968 F100 2wd - Rangoon Red - 360 w/T18 - power steering and brakes
1997 Honda CBR 900RR
- CH3NO2
- New Member
- Posts: 112
- Joined: Mon Mar 13, 2006 7:01 pm
- Location: Florida, Plant City
Re: Jacking instruction sticker placement
I have 3 68's and all of them have the sticker on the glove box door just right of center. Hope that clears that up.
-
- Blue Oval Fanatic
- Posts: 852
- Joined: Wed Nov 09, 2016 5:49 pm
- Location: Galion, Ohio
Re: Jacking instruction sticker placement
That's what I needed to know.........CH3NO2 wrote:I have 3 68's and all of them have the sticker on the glove box door just right of center. Hope that clears that up.
"Life is a garden - dig it"...........
1968 F100 2wd - Rangoon Red - 360 w/T18 - power steering and brakes
1997 Honda CBR 900RR
1968 F100 2wd - Rangoon Red - 360 w/T18 - power steering and brakes
1997 Honda CBR 900RR