I currently design and manufacture paintball parts and markers but have been thinking about developing a line of 67-72 F100 parts. Some engine parts can be used across various Ford cars and trucks. Parts will be small batch runs so that will be reflected in pricing, competing with China and the big outfits like Summit, Jegs and others is not my goal. The goal is to simply fill a void I see in the market with quality designed and manufactured parts. I'm just going to test the market and see if there's an interest then go from there.
First to market is a thermostat housing for a 289, 302, 351. These are very low profile to clear the timing chain cover and water pump. From my estimation it's the lowest profile ever made for the SBF. I believe they will also work on the 50oz imbalance engines but I dont have anything to test them on. My research shows that they all use the same gasket so it leads be to believe they will.
Kit includes everything shown in the pictures below.
Machined from 6061 billet.
O rings are common Buna-N orings available everywhere, sizes are engraved inside the housing if you ever need to replace them.
All housings include a sensor port with a 3/8 NPT threaded hole.
Pricing includes Priority Mail Shipping. $95
Message me if you're interested, thanks
Luke's Customs
Moderator: FORDification
-
luke-ao
- Preferred User
- Posts: 383
- Joined: Wed Jun 26, 2013 10:58 am
- Location: Arizona, In the middle.
- Contact:
Luke's Customs
You do not have the required permissions to view the files attached to this post.
Last edited by luke-ao on Mon Mar 11, 2019 4:59 pm, edited 1 time in total.
-
luke-ao
- Preferred User
- Posts: 383
- Joined: Wed Jun 26, 2013 10:58 am
- Location: Arizona, In the middle.
- Contact:
Re: Luke's Customs
$12 each plus shipping
Bushing-Brake Pushrod F100 F250 67-72 $12
CNC machined in the USA.
(Bolt not included)
In stock ready to ship, message me for a paypal invoice.
There was confusion for what these bushing are for so this should clear it up.
Bushing-Brake Pushrod F100 F250 67-72 $12
CNC machined in the USA.
(Bolt not included)
In stock ready to ship, message me for a paypal invoice.
There was confusion for what these bushing are for so this should clear it up.
You do not have the required permissions to view the files attached to this post.
Last edited by luke-ao on Fri Aug 21, 2020 10:15 am, edited 6 times in total.
-
luke-ao
- Preferred User
- Posts: 383
- Joined: Wed Jun 26, 2013 10:58 am
- Location: Arizona, In the middle.
- Contact:
Re: Luke's Customs
Save 2
-
luke-ao
- Preferred User
- Posts: 383
- Joined: Wed Jun 26, 2013 10:58 am
- Location: Arizona, In the middle.
- Contact:
Re: Luke's Customs
Save 3
-
luke-ao
- Preferred User
- Posts: 383
- Joined: Wed Jun 26, 2013 10:58 am
- Location: Arizona, In the middle.
- Contact:
Re: Luke's Customs
Save 4
-
jp2005
- Blue Oval Guru
- Posts: 1085
- Joined: Fri Jul 02, 2010 1:29 pm
- Location: Phoenix AZ
Re: Luke's Customs
Cool. You going to make anything for a 390?
Thanks JP! Ms. Cordova is a factory 1969 Ford F100 Ranger with a 390, Front disc brakes, Cordova copper orange, behind the seat box
-
luke-ao
- Preferred User
- Posts: 383
- Joined: Wed Jun 26, 2013 10:58 am
- Location: Arizona, In the middle.
- Contact:
Re: Luke's Customs
Engine parts wont really be the focus, at the moment all I have are the thermostat housings and I could also sell the emission hole head plugs if there was interest.
Mostly what I had in mind were interior parts and perhaps hood hinges and stuff like that.
Here are the head plugs, nothing special but it may be something people want.
Mostly what I had in mind were interior parts and perhaps hood hinges and stuff like that.
Here are the head plugs, nothing special but it may be something people want.
You do not have the required permissions to view the files attached to this post.
-
luke-ao
- Preferred User
- Posts: 383
- Joined: Wed Jun 26, 2013 10:58 am
- Location: Arizona, In the middle.
- Contact:
Re: Luke's Customs
If there's any interest I could make and sell brake 'pedal to master cylinder bushings'. All I could find were $10 plastic ones on ebay so I made a brass one for myself. The aluminum ones were prototypes but I'm sure they would work too.
You do not have the required permissions to view the files attached to this post.
-
1969 Crewcab
- New Member
- Posts: 5
- Joined: Sun Dec 09, 2018 8:16 am
Re: Luke's Customs
Im interested in the pedal bushing.
-
luke-ao
- Preferred User
- Posts: 383
- Joined: Wed Jun 26, 2013 10:58 am
- Location: Arizona, In the middle.
- Contact:
Re: Luke's Customs
I can do the brass pedal bushing for $12 plus Priority Mail shipping.
-
1969 Crewcab
- New Member
- Posts: 5
- Joined: Sun Dec 09, 2018 8:16 am
Re: Luke's Customs
Luke
Send me 3 i have a 69 crew and a 75 crew and my buddy has a 74 they are all the same.
Tell me how to pay.
ddweigert@hotmail.com
Thanks
David
Send me 3 i have a 69 crew and a 75 crew and my buddy has a 74 they are all the same.
Tell me how to pay.
ddweigert@hotmail.com
Thanks
David
-
luke-ao
- Preferred User
- Posts: 383
- Joined: Wed Jun 26, 2013 10:58 am
- Location: Arizona, In the middle.
- Contact:
Re: Luke's Customs
Invoice for 3 sent through paypal, thanks.
-
luke-ao
- Preferred User
- Posts: 383
- Joined: Wed Jun 26, 2013 10:58 am
- Location: Arizona, In the middle.
- Contact:
Re: Luke's Customs
Shipped those today (To the name on the pp account) should be there in a few days, thanks.1969 Crewcab wrote:Luke
Send me 3 i have a 69 crew and a 75 crew and my buddy has a 74 they are all the same.
Tell me how to pay.
ddweigert@hotmail.com
Thanks
David
-
luke-ao
- Preferred User
- Posts: 383
- Joined: Wed Jun 26, 2013 10:58 am
- Location: Arizona, In the middle.
- Contact:
Re: Luke's Customs
I have brake pedal bushings in stock.
-
luke-ao
- Preferred User
- Posts: 383
- Joined: Wed Jun 26, 2013 10:58 am
- Location: Arizona, In the middle.
- Contact:
Re: Luke's Customs
Did those bushing work out for you?1969 Crewcab wrote:Luke
Send me 3 i have a 69 crew and a 75 crew and my buddy has a 74 they are all the same.
Tell me how to pay.
ddweigert@hotmail.com
Thanks
David