Hi guys, I'm having a problem id-ing the colors on my turn signal harness off of the diagram I have. I think it might not be for a 71" because my harness doesn't have the same colors. I have no orange wire for #5, but I have 2 greens (1 light 1 dark. What am I missing?
Thanks
Ron
I'll post a pic.
Turn signal harness problem
Moderators: FORDification, Thunderfoot
-
Ron_Hall
- New Member
- Posts: 214
- Joined: Sat Oct 22, 2016 2:59 am
- Location: Reno, NV
Turn signal harness problem
You do not have the required permissions to view the files attached to this post.
1971 F100 SWB 390 FE - bored.030 over
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
-
Thipdar
- New Member
- Posts: 84
- Joined: Fri Apr 09, 2010 8:26 pm
Re: Turn signal harness problem
Here's what I have - but this is supposed to be for a 1970
2 White w/Blue stripe
3 Green w/White stripe
5 Green
9 Yellow w/Black stripe
10 Red w/Black stripe
44 Blue
282 Green
283 Yellow w/Black stripe
810, 810A Red w/Black stripe
Hope that helps!
2 White w/Blue stripe
3 Green w/White stripe
5 Green
9 Yellow w/Black stripe
10 Red w/Black stripe
44 Blue
282 Green
283 Yellow w/Black stripe
810, 810A Red w/Black stripe
Hope that helps!