Rebuild or replace Factory 2 Barrel on a 360FE
Moderators: Ranchero50, DuckRyder
-
sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: Rebuild or replace Factory 2 Barrel on a 360FE
These guys are the best! I won't buy a stock carb from anybody else. http://www.guaranteedcarburetors.com
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
-
Manny
- Blue Oval Guru
- Posts: 1190
- Joined: Wed Oct 04, 2006 7:15 pm
- Location: Georgia, Lake City
- Contact:
Re: Rebuild or replace Factory 2 Barrel on a 360FE
MadJoe wrote:I did a little digging myself and could only find a bunch of junky sub-$100 new ones on Amazon (select their automotive section and search for 'Ford 2100 carburetor'), but the reviews speak to the lack of quality for most of them. I wouldn't be able to shake the worry that it was about to poop a venturi straight into my engine, so I'm going to pass on these. If Mikeincool has a better source, I'm all ears, but if he got it from Amazon, I can only suggest he take a good hard look at it and make sure nothing is loose or cracked and about to destroy his engine.Manny wrote:MadJoe wrote:
Would you mind posting a link to this carb you found for so cheap?
Only new reman ones i have seen are thru summit for the 200-300 range. Freind has put a few on customers broncos and they are nice straight up out the box and done.Would like to see a $100.00 autolite 2100
Agree one of those classic get what you pay for.
Just another Ford fool named Dan.
The Junk that hangs around
67' F-250 highboy Camper special cross breed currently under way
http://www.fordification.com/forum/view ... 22&t=86706
1974 Bronco 302 3 speed
1984 bronco 302 c6 35's
1994 F350 7.3 5spd dually.
The Junk that hangs around
67' F-250 highboy Camper special cross breed currently under way
http://www.fordification.com/forum/view ... 22&t=86706
1974 Bronco 302 3 speed
1984 bronco 302 c6 35's
1994 F350 7.3 5spd dually.
woods wrote: The rust holes in my truck were a factory install (very rare).
-
jzjames
- 100% FORDified!
- Posts: 1785
- Joined: Sun Jan 09, 2005 2:59 pm
- Location: Washington, Windy Point
Re: Rebuild or replace Factory 2 Barrel on a 360FE
I waited and one eventually came up on eBay.
Then, there’s like a 50/50 chance it will be a good one.
I’d wait.
Then, there’s like a 50/50 chance it will be a good one.
I’d wait.