What trans adaptor for a 4r70w with 351c
Moderators: FORDification, 70_F100
-
Mercury100
- New Member
- Posts: 49
- Joined: Thu Oct 05, 2017 10:31 pm
What trans adaptor for a 4r70w with 351c
I see lots of adapters for gm 4L80e and 4L60e and 700r4
-
Manny
- Blue Oval Guru
- Posts: 1190
- Joined: Wed Oct 04, 2006 7:15 pm
- Location: Georgia, Lake City
- Contact:
Re: What trans adaptor for a 4r70w with 351c
Mercury100 wrote:I see lots of adapters for gm 4L80e and 4L60e and 700r4
If it's a genuine cleveland. No issue the clevelands shared a 302 351 bell housing pattern. so find yourself a small block 4r70w and rock on!
Just another Ford fool named Dan.
The Junk that hangs around
67' F-250 highboy Camper special cross breed currently under way
http://www.fordification.com/forum/view ... 22&t=86706
1974 Bronco 302 3 speed
1984 bronco 302 c6 35's
1994 F350 7.3 5spd dually.
The Junk that hangs around
67' F-250 highboy Camper special cross breed currently under way
http://www.fordification.com/forum/view ... 22&t=86706
1974 Bronco 302 3 speed
1984 bronco 302 c6 35's
1994 F350 7.3 5spd dually.
woods wrote: The rust holes in my truck were a factory install (very rare).
-
Mercury100
- New Member
- Posts: 49
- Joined: Thu Oct 05, 2017 10:31 pm
Re: What trans adaptor for a 4r70w with 351c
The Older ford small block bolt pattern is not the same as the newer modular engine bolt pattern.
I could be wrong. Some one correct me if I’m wrong.
I could be wrong. Some one correct me if I’m wrong.
-
Manny
- Blue Oval Guru
- Posts: 1190
- Joined: Wed Oct 04, 2006 7:15 pm
- Location: Georgia, Lake City
- Contact:
Re: What trans adaptor for a 4r70w with 351c
I may be wrong not mod motor special I will check this. I am putting 4r75W guts in a AOD case to keep full hydraulic drive style.Mercury100 wrote:The Older ford small block bolt pattern is not the same as the newer modular engine bolt pattern.
I could be wrong. Some one correct me if I’m wrong.
Just another Ford fool named Dan.
The Junk that hangs around
67' F-250 highboy Camper special cross breed currently under way
http://www.fordification.com/forum/view ... 22&t=86706
1974 Bronco 302 3 speed
1984 bronco 302 c6 35's
1994 F350 7.3 5spd dually.
The Junk that hangs around
67' F-250 highboy Camper special cross breed currently under way
http://www.fordification.com/forum/view ... 22&t=86706
1974 Bronco 302 3 speed
1984 bronco 302 c6 35's
1994 F350 7.3 5spd dually.
woods wrote: The rust holes in my truck were a factory install (very rare).
-
JoshT
- Preferred User
- Posts: 327
- Joined: Sat Oct 10, 2015 11:09 pm
- Location: Middle Georgia
Re: What trans adaptor for a 4r70w with 351c
4R70W was installed with the 302 in the V8 Explorers. 302 Windsor has the same bolt pattern as all the other older ford small blocks. Yes, I'm sure about this because I have a 98 Explorer 302 and 4R70W sitting on a 86 Ranger frame in the back yard.Mercury100 wrote:The Older ford small block bolt pattern is not the same as the newer modular engine bolt pattern.
I could be wrong. Some one correct me if I’m wrong.
1968 F-100 4x4 long bed - 360 FE - NP435 w/ Dana 21 - PS & PB conversion - Front Disc Swap - 265/75R16 - 1" S.L. & 2" B.L. (to be removed) - Homemade tube bumpers - Warn 8274 - Currently wearing 1970 body
-
Mercury100
- New Member
- Posts: 49
- Joined: Thu Oct 05, 2017 10:31 pm
Re: What trans adaptor for a 4r70w with 351c
Thanks for the info.