Finally got started on my 72 f250 body swap.
What are the brackets in the attached picture and do they do anything (other than contribute to a substantial amount of rust around their base)?
I'm not doing a restoration by any means, but am going to paint the frame and make any obvious repairs as I go, while the body is off.
Would it hurt anything to just remove these four brackets?
what are these called?
Moderators: FORDification, Doug Comer
-
- New Member
- Posts: 72
- Joined: Sat Aug 29, 2015 11:14 am
- Location: Wyandotte, OK
what are these called?
You do not have the required permissions to view the files attached to this post.
-
- 100% FORDified!
- Posts: 1671
- Joined: Thu Oct 13, 2011 9:39 am
- Location: Windsor, CO
- Contact:
Re: what are these called?
They prevent leaf spring over travel under certain conditions, at least that is what I always believed. Not sure if it was an over engineered part or if it is something that is utilized from time to time that we just don't see or recognize when we are driving.
""Never shoot a large caliber man with a small caliber bullet."
2017 Ford Raptor
1970 F250 4x4
1948 Willys CJ2A w/ Ford Flathead V-8
1975 Ford Bronco
2017 Ford Raptor
1970 F250 4x4
1948 Willys CJ2A w/ Ford Flathead V-8
1975 Ford Bronco
-
- New Member
- Posts: 72
- Joined: Sat Aug 29, 2015 11:14 am
- Location: Wyandotte, OK
Re: what are these called?
Thanks
-
- 100% FORDified!
- Posts: 2062
- Joined: Sun Oct 26, 2008 8:06 pm
- Location: West Michigan
Re: what are these called?
That one leaf that's not part of the pack is an optional overload spring , the brackets are for that .
That way you can have a mild spring for light loads and more spring for heavy loads.
That way you can have a mild spring for light loads and more spring for heavy loads.
- ok68crewcab
- Preferred User
- Posts: 272
- Joined: Sun Jun 24, 2007 9:08 pm
- Location: Edmond, Oklahoma
Re: what are these called?
Ford used to promote those overload springs in advertisements claiming a smoother ride unloaded while still being able to handle the heavy loads.
2 Blessed 2 Be Stressed
-
- New Member
- Posts: 72
- Joined: Sat Aug 29, 2015 11:14 am
- Location: Wyandotte, OK
Re: what are these called?
If they're supposed to make a smoother ride, I don't think mine are working, .
- Ranchero50
- Moderator
- Posts: 5799
- Joined: Wed Nov 08, 2006 7:02 pm
- Location: Maryland, Hagerstown
- Contact:
Re: what are these called?
With a ton of stones in the back mine touch, with 3 tons they work really well.
If you don't think they work well you should go drive a bump side F-750 with 15 leaks stacked up per side.
If you don't think they work well you should go drive a bump side F-750 with 15 leaks stacked up per side.
'70 F-350 CS Cummins 6BT 10klb truck 64k mile Bahama Blue
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.