1967 "PaPaw"
Moderator: FORDification
-
- New Member
- Posts: 189
- Joined: Sun Mar 13, 2011 7:26 pm
1967 "PaPaw"
I bought this truck right around Thanksgiving 2013. Named it Papaw cause it reminded me of an old papaws truck when I first bought it. Got the truck running and drove it for a few months or so till the engine started knocking then let it sit for quite some time till I got bored and decided to start working on it. I replaced the motor and trans with a 89 302 out of a mustang with the AOD transmission. Lowered, wheels, and disc brakes. Things are about complete with it other than small odds and ins. Hopefully finish it this fall. If anyone has an auto column 67-69 let me know, I need one!
- flyboy2610
- 100% FORDified!
- Posts: 4901
- Joined: Sun Oct 03, 2004 6:42 pm
- Location: Nebraska, Lincoln
Re: 1967 "PaPaw"
That's a nice looking truck!
"If the women don't find you handsome, they should at least find you handy."
Red Green
If you're going to live like there's no hell...............
you'd better be right.
http://theworldasiseeit-flyboy2610.blog ... ee-it.html
Red Green
If you're going to live like there's no hell...............
you'd better be right.
http://theworldasiseeit-flyboy2610.blog ... ee-it.html
- guerra
- Blue Oval Fan
- Posts: 700
- Joined: Wed Mar 10, 2010 4:29 pm
- Location: West Texas
- pedro69ford
- New Member
- Posts: 115
- Joined: Sat Jan 10, 2009 1:02 pm
- Location: tennesse red boiling springs
Re: 1967 "PaPaw"
THATS NIIIIIIIIIICE.WHAT REAR DROP DID YOU DO?LOVING THAT STANCE. WHAT WHEEL AND TIRE COMBO DO YOU HAVE?
-
- New Member
- Posts: 189
- Joined: Sun Mar 13, 2011 7:26 pm
Re: 1967 "PaPaw"
Thanks, the front is Djm and rear I just bought two leaf spring perches, from a local race shop for $15 flipped the rear end upside down and welded the new ones on in the proper location. As for the wheels and tires 18x8 front 20x10 rearpedro69ford wrote: THATS NIIIIIIIIIICE.WHAT REAR DROP DID YOU DO?LOVING THAT STANCE. WHAT WHEEL AND TIRE COMBO DO YOU HAVE?
- sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: 1967 "PaPaw"
Very nice!
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
- jimmy828
- 100% FORDified!
- Posts: 1611
- Joined: Thu Dec 23, 2010 6:47 pm
- Location: asheville,NC
Re: 1967 "PaPaw"
Papaw is a very nice ride!!
-
- Blue Oval Guru
- Posts: 1471
- Joined: Tue Apr 05, 2011 3:30 pm
- Location: Southeastern Massachusetts
Re: 1967 "PaPaw"
Very nice.
- JWW
- Blue Oval Fanatic
- Posts: 793
- Joined: Wed Apr 11, 2007 7:57 pm
- Location: Tennessee
Re: 1967 "PaPaw"
Nice!
JWW
1967 F100 Ranger, Auto, 240ci
2004 F150 Crew Cab
My project: http://www.fordification.com/forum/view ... &sk=t&sd=a
1967 F100 Ranger, Auto, 240ci
2004 F150 Crew Cab
My project: http://www.fordification.com/forum/view ... &sk=t&sd=a
- Heirloom
- Blue Oval Fan
- Posts: 549
- Joined: Fri Feb 08, 2013 2:33 pm
- Location: Paradise
Re: 1967 "PaPaw"
At the risk of being repetitive....that's nice.
Seriously though
Seriously though
~Heirloom
'68 F250 360, 4 spd Project Thread!
Plans are for a stout 400, C6, 3.54 gears, 33" BFG AT's, bucket seats and custom console. Final assembly, nearing start up...
"Those who hammer their guns into plows will plow for those who do not."
~ Thomas Jefferson
"America will never be destroyed from the outside. If we falter and lose our freedoms, it will be because we destroyed ourselves."
~ Abraham Lincoln
'68 F250 360, 4 spd Project Thread!
Plans are for a stout 400, C6, 3.54 gears, 33" BFG AT's, bucket seats and custom console. Final assembly, nearing start up...
"Those who hammer their guns into plows will plow for those who do not."
~ Thomas Jefferson
"America will never be destroyed from the outside. If we falter and lose our freedoms, it will be because we destroyed ourselves."
~ Abraham Lincoln
- pedro69ford
- New Member
- Posts: 115
- Joined: Sat Jan 10, 2009 1:02 pm
- Location: tennesse red boiling springs
Re: 1967 "PaPaw"
very nice,i thought you did an axle flip just wasnt real sure.any interior shots?sure is clean.
-
- New Member
- Posts: 189
- Joined: Sun Mar 13, 2011 7:26 pm
Re: 1967 "PaPaw"
pedro69ford wrote: very nice,i thought you did an axle flip just wasnt real sure.any interior shots?sure is clean.
- popeyes71
- Blue Oval Guru
- Posts: 1176
- Joined: Tue Jan 31, 2012 3:46 pm
- Location: Bay Area, Ca.
Re: 1967 "PaPaw"
Beautiful truck my friend! I like the look and direction your going with the truck!
-Popeye-
1971 F-250 4x4 Highboy
1966 Chevy Nova, 8 second 10.5 car
1971 F-250 4x4 Highboy
1966 Chevy Nova, 8 second 10.5 car
- 67nukeford
- Blue Oval Fan
- Posts: 589
- Joined: Tue Aug 19, 2008 3:20 pm
- Location: Nebraska, Omaha/Elkhorn
Re: 1967 "PaPaw"
What a beautiful, clean truck!! Nice work!