Parting 3 bumps! Let me know what you might need.

straight-shot · Post by **straight-shot** » Fri Feb 14, 2014 1:19 pm

I have the housings! PM sent!

BLS2042 · Post by **BLS2042** » Sat Feb 15, 2014 1:24 am

Back on Feb 3 you said you might have a aux fuel tank.
If you do, Pm with info
Thanks

straight-shot · Post by **straight-shot** » Sat Feb 15, 2014 1:32 am

Sorry, no aux tanks.

terrydaktal · Post by **terrydaktal** » Sun Feb 16, 2014 1:02 pm

I would be interested in a steering wheel. For a 71 f250.
Thanks

squearl · Post by **squearl** » Fri Feb 21, 2014 10:21 pm

I am looking for good front disc brake dust shields for a 1974 2wheel drive f-100. Got anything? or know where I can get em?

Calfdemon · Post by **Calfdemon** » Thu Feb 27, 2014 12:13 am

Looking for a decent stock air cleaner assembly (non-oil bath).

toddspeed · Post by **toddspeed** » Wed Mar 05, 2014 4:01 pm

Looking for a pair of 1965-1972 rear 2WD leaf springs (standard, NOT flex-o-matic). Just need the springs, have all the other stuff.

And/or if someone wants to trade for a flex-o-matic setup....I have that and I am removing to lower my truck.

guhfluh · Post by **guhfluh** » Sat Mar 08, 2014 7:54 pm

Do you have a driver side fresh air vent in red? Or any color?

kyle ray · Post by **kyle ray** » Mon Mar 10, 2014 7:48 pm

do you have small block engine mounts (perches) ?

Trokita101 · Post by **Trokita101** » Sat Mar 15, 2014 1:56 pm

Do you have the hardware for mounting the spare tire underneath the bed?

straight-shot · Post by **straight-shot** » Sun Mar 16, 2014 10:49 pm

Hello everyone!

terrydaktal wrote:I would be interested in a steering wheel. For a 71 f250.
Thanks

I have a 1972 steering wheel with a cover on it that I will check and get you some pics!

squearl wrote:I am looking for good front disc brake dust shields for a 1974 2wheel drive f-100. Got anything? or know where I can get em?

Sorry don't have any.

Calfdemon wrote:Looking for a decent stock air cleaner assembly (non-oil bath).

Sorry no air cleaners.

toddspeed wrote:Looking for a pair of 1965-1972 rear 2WD leaf springs (standard, NOT flex-o-matic). Just need the springs, have all the other stuff.

And/or if someone wants to trade for a flex-o-matic setup....I have that and I am removing to lower my truck.

I have springs but shipping might be quite a bit! Let me know!

guhfluh wrote:Do you have a driver side fresh air vent in red? Or any color?

I do have the vents just not in red. I can get you some pics!

kyle ray wrote:do you have small block engine mounts (perches) ?

Sorry no small block mounts.

Trokita101 wrote:Do you have the hardware for mounting the spare tire underneath the bed?

Will check and let you know.

Thanks to all!!!

.

grantorinosport · Post by **grantorinosport** » Thu Apr 03, 2014 1:31 pm

Looking for rear leaf spring parts for 2WD Flex-O-Matic suspension. Specifically, I am looking for the "compensator" in the rear of the spring. It is the part that bolts to the rear frame perch and goes up over the spring.

Thanks!

straight-shot · Post by **straight-shot** » Thu Apr 03, 2014 10:17 pm

I have them!
PM sent.

Smitty127 · Post by **Smitty127** » Fri Apr 04, 2014 4:20 am

Hi there, I need c6 trans hump cover 2wd, brake pedal auto with attaching hardware, clean emergency brake mechanism.
Stu Smith

straight-shot · Post by **straight-shot** » Sat Apr 05, 2014 12:10 pm

Smitty127 wrote:Hi there, I need c6 trans hump cover 2wd, brake pedal auto with attaching hardware, clean emergency brake mechanism.
Stu Smith

I have everything you are looking for! PM sent!

The FORDification.com Forums

Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.

Re: Parting 3 bumps! Let me know what you might need.