sanderson headers ff461 SOLD

[jeffery2304]

http://www.sandersonheaders.com/Sanders ... ckups.html


surface rust only,opened up to cj port,can be used with std port, flange collector has been removed and extensions added 100.00 plus shipping. holt mich 48842

sold.....

[nastys toys]

Are these bare steel? So they have 1 7/8" primary tubes with the flange ports oped to cj heads? And a 3" collector flange? Any idea if they will fit a 78-79 f150 2wd frame with a 460?

[jeffery2304]

Are these bare steel? So they have 1 7/8" primary tubes with the flange ports oped to cj heads? And a 3" collector flange? Any idea if they will fit a 78-79 f150 2wd frame with a 460?

yes bare steel... 1-7/8. cant remember how i came off of the collector,there wrapped in header tape. it has a 3' exit now. because these are block huggers, witch is only really true for the drivers side they will fit damn near anything. these have been modified to come up and over the crossmember . opened up the ports to fit my cj port size. i always used gaskets to, they recommend black rtv if i remember..to messy and not needed for me, to each there own. these are way ahead of getting them new all the mods i have done is most likley what u would end up with.

[nastys toys]

I'll gladly take these headers off your hands TODAY

[jeffery2304]

SOLD.............

[nastys toys]

Poooooooppppppppppppp roper