New Member From TX
Moderator: FORDification
-
98Murray
- New Member
- Posts: 4
- Joined: Thu Dec 26, 2013 8:44 pm
- Location: Ennis, Texas
New Member From TX
Hi all I have my dad's old 1968 F100 and I am slowly fixing it up to get back on the road and eventually restore it. I got the truck in 2006 when my dad passed away and it has sat since then until early 2013 I started working on it. I live In a small rural town just south of Dallas Texas and I am 16 years old. I have been a lawn mower mechanic for about 4 years now so I know the basics of how engines work and how to turn a wrench but I am still new to the automotive world. I have a truck to drive in now, a 2000 Dodge Ram 1500 so I don't need to fix this Ford up as a daily driver but when it is running and driving it will get drove. My F100 is banged up and battered but it still has life left in it. It is a 1968 F100 Ranger short wheel base 2WD. It is harbor blue with a Wimbledon white roof. It originally had a 360 engine and 3 speed column shift trans. As of now it has a unknown engine and a 3 speed floor shift trans. Both are not original and this truck had a auto at one time. It also has rust issues and a few bad body panels. It needs a lot of love but it will be fixed up. Found this forum with the help of some friends on Facebook and thought I'd join so I can get some help and advice on my truck. Thanks for reading
You do not have the required permissions to view the files attached to this post.
-
lennyp
- Blue Oval Guru
- Posts: 1471
- Joined: Tue Apr 05, 2011 3:30 pm
- Location: Southeastern Massachusetts
Re: New Member From TX
from Massachusetts.-
HOWDY69
- Preferred User
- Posts: 484
- Joined: Sat Dec 31, 2005 6:31 pm
- Location: California, Sacramento
Re: New Member From TX
Nice truck...you have come to the right place.69 F250, FE Specialties 410, CJ Valves, RPM Intake, Holley 4150,......10 Smiles per gallon
71 Clydesdale in many pieces; 302 roller motor waiting impatiently
71 Clydesdale in many pieces; 302 roller motor waiting impatiently
-
fireguywtc
- 100% FORDified!
- Posts: 3682
- Joined: Thu Sep 11, 2008 7:37 pm
- Location: North Alabama
Re: New Member From TX
from central Texas! 
Bill
1967 F-250 LWB 2WD 352 V8, 4spd manual, true duals, 122k original miles (currently being restored)
2024 F350 CCSB, darkened bronze
1967 F-250 LWB 2WD 352 V8, 4spd manual, true duals, 122k original miles (currently being restored)
2024 F350 CCSB, darkened bronze
-
jimmy828
- 100% FORDified!
- Posts: 1611
- Joined: Thu Dec 23, 2010 6:47 pm
- Location: asheville,NC
Re: New Member From TX
from Asheville NC-
Mancar1
- 100% FORDified!
- Posts: 5390
- Joined: Thu Jun 10, 2010 8:13 am
- Location: USS Gramps Garage (DD-727) Tehama County, Northern Ca.
Re: New Member From TX
Welcome aboard from Gerber, Ca.
May your sails stay full, and your knots not slip. Unless a slip knot.
Once I thought I was wrong, but I was wrong.
Life is a banquet, and every days a feast.
68 F-250 CS 390 C-6 P/S A/C front disc. 2nd owner.
2016 GMC Terrain Denali 301 HP V-6 AWD.
2009 Silverado Crew Cab, V-8, 4X4.
DD-727
DD-806
AE-35
LSD-39
AS-41
AR-8
Once I thought I was wrong, but I was wrong.
Life is a banquet, and every days a feast.
68 F-250 CS 390 C-6 P/S A/C front disc. 2nd owner.
2016 GMC Terrain Denali 301 HP V-6 AWD.
2009 Silverado Crew Cab, V-8, 4X4.
DD-727
DD-806
AE-35
LSD-39
AS-41
AR-8
-
tac
- Preferred User
- Posts: 443
- Joined: Mon Jun 03, 2013 10:50 am
- Location: Dallas/Ft. Worth
Re: New Member From TX
hello from the North. Just a little North, in Colleyville Texas.