
Due to the fact that I had to trim the bottom flange of the frame, I have to section the spring hangers so they don't run into the tank. (And no, I am not the one responsible for the bed mounting mod' on the upper flange.) BobbyFord wrote up his fuel tank swap and it was excellent. I am changing it up a little bit to meet my needs. I am going to mount the tank to the bottom flange of the frame with J-nuts and bolts from the bottom.

I drilled the cross member ahead of the fuel tank so I can bolt directly to it.

I will fab up some tabs for the rear and weld them to the rear cross member, then bolt to them in the same manner.

I'm pretty happy with how its coming along. I think I may even have enough room to run a 90* bend and a filler in the bedside.
