Driveshaft

danno · Post by **danno** » Sun Feb 10, 2013 4:59 pm

Need a driveshaft for a c-4 transmission for a 69 f-100 shortbed. Anyone got one!

ford4x4fun · Post by **ford4x4fun** » Sun Feb 10, 2013 8:56 pm

I might I got a hole bunch of driveshafts from another member here. I am in Brandon FL, if you have some measurements and I have it, I will give it to you, you just have to come get it.

danno · Post by **danno** » Mon Feb 11, 2013 5:52 am

Thanks,Im not sure what the measurement are going to be,I went from a T-18 standard trans to a c-4 automatic and the drive shafts are a totally differant. But maybe someone will now on here.

danno · Post by **danno** » Mon Feb 11, 2013 10:08 am

Im trying to get some measurement from a couple of people hrer in Ocala that have shortbeds to see what there driveshaft measures. I'll get vback to you Thanks Bunches

ford4x4fun · Post by **ford4x4fun** » Mon Feb 11, 2013 10:23 pm

Not a problem! Basketcase (jeff) gave them to me before he moved North. I told him I would try my best to get them to guys that needed them! PM when you get the measurements and I will check for you!

danno · Post by **danno** » Tue Feb 12, 2013 5:14 am

Thanks Man, Willdo! Im going to be putting it in this weekend, so hope that all goes well and I can get some measurement ...

hotrod ford · Post by **hotrod ford** » Sun Feb 17, 2013 2:41 pm

Ford4x4 I too may need a drive shaft. I'm at Ft Rucker Alabama. Not sure how far it is from you. My set up is for a swb ,C6 to for 9".

ford4x4fun · Post by **ford4x4fun** » Sun Feb 17, 2013 7:30 pm

Is this the same guy I met up with in Afghanistan? I might have that driveshaft you will have to send me the length your looking for though!

hotrod ford · Post by **hotrod ford** » Sun Feb 17, 2013 8:15 pm

I was there in 2010-2011, but I don't think we met. Are you wanting the measurments frome tranny yoke to axle yoke?

ford4x4fun · Post by **ford4x4fun** » Mon Feb 18, 2013 8:22 am

I am going to pull all the driveshafts out today and I will post pictures and measurements. I was there 08 to 09, I think the members name was hawkrod! I tried to look up the post about the afghanistan meet and greet but I guess it got lost. I will have photos and measurements up later today. If one fits I will send it to you for the price of shipping.

hotrod ford · Post by **hotrod ford** » Mon Feb 18, 2013 11:49 am

Alright, thanks.

danno · Post by **danno** » Mon Feb 18, 2013 12:54 pm

Hey I will look also.Still dont have mine installed yet. Its been a battle over getting the right parts and converter

BobbyFord · Post by **BobbyFord** » Mon Feb 18, 2013 2:26 pm

Measurements are here...> http://www.fordification.com/partnos/driveshafts_01.htm

ford4x4fun · Post by **ford4x4fun** » Mon Feb 18, 2013 4:38 pm

This is what I have thanks to Jeff AKA Basketcase

From left to right measurements! All in inches

27
37 1/4
34 3/4
37 1/2
36
38
43 1/4
43 1/2
58 3/4

If you need one let me know. I will send them to you for the price of the ride. Or if your close you can come pick one up.

danno · Post by **danno** » Mon Feb 18, 2013 5:29 pm

That longest one is it a slip yoke or fixed yoke shaft. Thats the only one thats close to my measurement.I came up with around 57 1/4 "

The FORDification.com Forums

Driveshaft

Driveshaft

Re: Driveshaft

Re: Driveshaft

Re: Driveshaft

Re: Driveshaft

Re: Driveshaft

Re: Driveshaft

Re: Driveshaft

Re: Driveshaft

Re: Driveshaft

Re: Driveshaft

Re: Driveshaft

Re: Driveshaft

Re: Driveshaft

Re: Driveshaft