It came without an engine and trans.Swegner99 wrote:I saw on your build thread your putting a Chevy engine in this truck, selling the existing engine out of it?
69 and 71 parts in Bullhead City, AZ.
Moderator: FORDification
-
philofab
- New Member
- Posts: 54
- Joined: Mon Oct 03, 2011 7:02 pm
- Location: Bullhead City, AZ
- Contact:
Re: 69 and 71 parts in Bullhead City, AZ.
I have a bunch of old Fords...
-
Swegner99
- Preferred User
- Posts: 308
- Joined: Wed Aug 10, 2011 10:11 am
- Location: Bullhead City, Arizona
Re: 69 and 71 parts in Bullhead City, AZ.
Alright thanks
1972 F250 Custom LWB
1999 F150 Ext Cab
2001 E350 15 Passenger Van
1999 F150 Ext Cab
2001 E350 15 Passenger Van
-
philofab
- New Member
- Posts: 54
- Joined: Mon Oct 03, 2011 7:02 pm
- Location: Bullhead City, AZ
- Contact:
Re: 69 and 71 parts in Bullhead City, AZ.
After going through the bumpers, it appears I have a good front bumper. The front that is on the truck has a crack so I am just going to scrap it. The on the truck has brackets that are welded/goobered on to it. It's only in 70-80% condition so I may scrap it too. The other rear appears to be something else so It's also going to the scrap bin.
The cab is getting scrapped once I pull the dash out of it.
The cab is getting scrapped once I pull the dash out of it.
I have a bunch of old Fords...
-
bindernut
- New Member
- Posts: 241
- Joined: Sun Jul 25, 2010 2:23 pm
- Location: Mattoon, Ill
Re: 69 and 71 parts in Bullhead City, AZ.
philofab wrote:After going through the bumpers, it appears I have a good front bumper. The front that is on the truck has a crack so I am just going to scrap it. The on the truck has brackets that are welded/goobered on to it. It's only in 70-80% condition so I may scrap it too. The other rear appears to be something else so It's also going to the scrap bin.
The cab is getting scrapped once I pull the dash out of it.
I'm kinda kicking myself for not grabbing that Ranger emblem. Also, your mystery bumper, I am nearly certain, is from a chevy van as they had the license plate pocket in the rear doors.
1971 f100 CS 360/AT
1970 f100 C 302/4spd
http://www.fordification.com/galleries/ ... ?pos=-6153
1969 IH Scout 800 304/AT
"ya know, you're about as useful as Amish tech support."
"The problem with quotes on the Internet is that it is hard to verify their authenticity" - Abraham Lincoln
Murphy lives in my shop and takes advantage of any opportunity he can find.
Law of Mechanical Repair - After your hands become coated with grease, your nose will begin to itch and you'll have to pee.
1970 f100 C 302/4spd
http://www.fordification.com/galleries/ ... ?pos=-6153
1969 IH Scout 800 304/AT
"ya know, you're about as useful as Amish tech support."
"The problem with quotes on the Internet is that it is hard to verify their authenticity" - Abraham Lincoln
Murphy lives in my shop and takes advantage of any opportunity he can find.
Law of Mechanical Repair - After your hands become coated with grease, your nose will begin to itch and you'll have to pee.
-
gregamorton
- Blue Oval Fanatic
- Posts: 935
- Joined: Mon Jun 15, 2009 7:57 pm
- Location: Blossom TX
Re: 69 and 71 parts in Bullhead City, AZ.
would you sell the rear bumper brackets?
1967 mercury F350 7.3 IDI ats turbo kit c6 gear vendor overdrive 3.73s rolling on 19.5s
1971 sport custom on 1979 f350 highboy frame 460 c6 np205 dana 60s 3.54s
1974 F100 baby blue & rust 240 3 speed 3.70s sitting on the ground!
1990 F250 extended cab FI460 e40d 3.55s daily driver
Possibly looking for my next bump right now!
1971 sport custom on 1979 f350 highboy frame 460 c6 np205 dana 60s 3.54s
1974 F100 baby blue & rust 240 3 speed 3.70s sitting on the ground!
1990 F250 extended cab FI460 e40d 3.55s daily driver
Possibly looking for my next bump right now!
-
philofab
- New Member
- Posts: 54
- Joined: Mon Oct 03, 2011 7:02 pm
- Location: Bullhead City, AZ
- Contact:
Re: 69 and 71 parts in Bullhead City, AZ.
That mystery bumper was crushed with the cab yesterday.bindernut wrote:I'm kinda kicking myself for not grabbing that Ranger emblem. Also, your mystery bumper, I am nearly certain, is from a chevy van as they had the license plate pocket in the rear doors.
I would but they appear to be welded/goobered onto the frame. Not sure if they are right or not either.gregamorton wrote:would you sell the rear bumper brackets?
I have a bunch of old Fords...
-
philofab
- New Member
- Posts: 54
- Joined: Mon Oct 03, 2011 7:02 pm
- Location: Bullhead City, AZ
- Contact:
Re: 69 and 71 parts in Bullhead City, AZ.
Cargo light and dash switches. Switches are $5 each or $20 for all five. Cargo is $10.
I have a bunch of old Fords...
-
philofab
- New Member
- Posts: 54
- Joined: Mon Oct 03, 2011 7:02 pm
- Location: Bullhead City, AZ
- Contact:
-
Mugwump
- Preferred User
- Posts: 287
- Joined: Fri Mar 09, 2007 2:12 pm
- Location: California, San Jose
Re: 69 and 71 parts in Bullhead City, AZ.
Any chance that you're selling the motor mount perches/towers, steering gearbox/pump/brackets if it's an FE?
*Edit: Assuming it has power steering
*Edit: Assuming it has power steering
'65 F100 Custom Cab Shortbed - current project
'69 F250 Ranger CS (Tug) - P/S, P/B, AC - 390/C6/D60 - Reef Aqua/Wimbledon White [sold]
'66 F100 Custom Cab (Shep) - 352/4sp/9" - Wimbledon White [gave to OldDawg]
-
philofab
- New Member
- Posts: 54
- Joined: Mon Oct 03, 2011 7:02 pm
- Location: Bullhead City, AZ
- Contact:
Re: 69 and 71 parts in Bullhead City, AZ.
No selling the gearbox but I can sell the pump and motor mounts. The truck VIN shows it as a I6/Manual but I think it had a V8/Auto in it. I will take pictures.Mugwump wrote:Any chance that you're selling the motor mount perches/towers, steering gearbox/pump/brackets if it's an FE?
*Edit: Assuming it has power steering
-
48prerunner
- Preferred User
- Posts: 495
- Joined: Thu Sep 30, 2010 5:44 pm
Re: 69 and 71 parts in Bullhead City, AZ.
Wouldn't have any good arm rests your not using?
-
philofab
- New Member
- Posts: 54
- Joined: Mon Oct 03, 2011 7:02 pm
- Location: Bullhead City, AZ
- Contact:
Re: 69 and 71 parts in Bullhead City, AZ.
They were covered with some nasty red velour. Threw them away.48prerunner wrote:Wouldn't have any good arm rests your not using?
I have a bunch of old Fords...
-
davbell22602
- Blue Oval Fan
- Posts: 677
- Joined: Thu Aug 12, 2010 6:55 pm
- Location: Bunker Hill, West Virginia
Re: 69 and 71 parts in Bullhead City, AZ.
Do you still have the cargo light?
-
philofab
- New Member
- Posts: 54
- Joined: Mon Oct 03, 2011 7:02 pm
- Location: Bullhead City, AZ
- Contact:
Re: 69 and 71 parts in Bullhead City, AZ.
Yes.davbell22602 wrote:Do you still have the cargo light?
I have a bunch of old Fords...
-
69SCJ
- New Member
- Posts: 188
- Joined: Wed Mar 28, 2012 7:16 pm
- Location: Inlet Beach, FL
Re: 69 and 71 parts in Bullhead City, AZ.
Are the hood emblems decent?
68 f100, 390, 4x4, NP435, LWB, 33/12.5/15's, power steering.... work in progress!!!