Clutch Fork Pivot...
Moderators: FORDification, 70_F100
-
Nitekruizer
- Blue Oval Fan
- Posts: 545
- Joined: Mon Mar 07, 2011 1:43 pm
- Location: Manitoba, Canada
Clutch Fork Pivot...
Does anyone have a photo of the clutch pivot used in an FE truck bellhousing?
390 FE IN A "BUMP" / 383 WEDGE IN A 2 DOOR C-BODY / 351W IN A FULL-SIZE MERCURY / 194 CHEVY 6 IN A DUECE / 2.4 DOHC CHRYSLER IN A PLASTIC BUBBLE (Driver)
-
robroy
- 100% FORDified!
- Posts: 3768
- Joined: Sun Jul 06, 2008 4:36 pm
- Location: California, Salinas
Re: Clutch Fork Pivot...
Good day NiteKruizer,
There are some good photos of the FE bell housing interior (including the pivot) in this thread:
Loose clutch fork brace in the bell housing; problem?
Robroy
There are some good photos of the FE bell housing interior (including the pivot) in this thread:
Loose clutch fork brace in the bell housing; problem?
Robroy
-
Nitekruizer
- Blue Oval Fan
- Posts: 545
- Joined: Mon Mar 07, 2011 1:43 pm
- Location: Manitoba, Canada
Re: Clutch Fork Pivot...
Thanks Robroy. That's exactly what I needed a good close-up picture. I thought I might be missing a part but it looks the same.
390 FE IN A "BUMP" / 383 WEDGE IN A 2 DOOR C-BODY / 351W IN A FULL-SIZE MERCURY / 194 CHEVY 6 IN A DUECE / 2.4 DOHC CHRYSLER IN A PLASTIC BUBBLE (Driver)
-
robroy
- 100% FORDified!
- Posts: 3768
- Joined: Sun Jul 06, 2008 4:36 pm
- Location: California, Salinas
Re: Clutch Fork Pivot...
Good afternoon NiteKruizer, you're welcome! 