Another rookie.
Moderator: FORDification
-
71 side step crazy
- New Member
- Posts: 148
- Joined: Fri Apr 16, 2010 3:30 am
- Location: lake elsinore CA
Re: Another rookie.
U could put a mild cam in it. A exhaust set up , and put like 3.00 gears in the rear it will give it a little horse power boost and the 3.00 gears will help with the RPM's. Good luck with the truck
-
Ranchero50
- Moderator
- Posts: 5799
- Joined: Wed Nov 08, 2006 7:02 pm
- Location: Maryland, Hagerstown
- Contact:
Re: Another rookie.
Lysol in the spray version works wonders for the AC. Of course if you really want to get rid of it I could take it off your hands 
360's are low compression. The best bang for your buck upgrade is put a 390 crank and rods in it with the 360 pistons. It's then a car spec 390 and will run pretty good.
Jamie
360's are low compression. The best bang for your buck upgrade is put a 390 crank and rods in it with the 360 pistons. It's then a car spec 390 and will run pretty good.
Jamie
'70 F-350 CS Cummins 6BT 10klb truck 64k mile Bahama Blue
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
-
71 side step crazy
- New Member
- Posts: 148
- Joined: Fri Apr 16, 2010 3:30 am
- Location: lake elsinore CA
Re: Another rookie.
Ranchero50 wrote:Lysol in the spray version works wonders for the AC. Of course if you really want to get rid of it I could take it off your hands
360's are low compression. The best bang for your buck upgrade is put a 390 crank and rods in it with the 360 pistons. It's then a car spec 390 and will run pretty good.
Jamie
