Hi, I need to buy D44 King Pin kit for my F100 1967 D44 4x4.
Nothing in Broncograveyard, Broncohilc, etc
Regards
Raul
F100 67 4WD King Pin Kit
Moderators: FORDification, 70_F100
-
cep62
- 100% FORDified!
- Posts: 2068
- Joined: Sun Oct 26, 2008 8:06 pm
- Location: West Michigan
Re: F100 67 4WD King Pin Kit
I'd try a Carquest or a NAPA store. 
-
70_F100
- Moderator
- Posts: 2999
- Joined: Mon Oct 22, 2007 11:23 am
- Location: North Carolina, Kernersville
Re: F100 67 4WD King Pin Kit
D44 doesn't have kingpins.
That MAY be your problem in searching for what you're looking for.
That MAY be your problem in searching for what you're looking for.
Wise men talk because they have something to say; fools talk because they have to say something.--Plato
Why is it that there's seldom time to fix it right the first time, but there's always time to fix it right the second time???
That's not an oil leak
That's SWEAT from all that HORSEPOWER!! 
Why is it that there's seldom time to fix it right the first time, but there's always time to fix it right the second time???
That's not an oil leak
That's SWEAT from all that HORSEPOWER!! -
averagef250
- 100% FORDified!
- Posts: 4387
- Joined: Fri Mar 17, 2006 12:58 am
- Location: Oregon, Beavercreek
Re: F100 67 4WD King Pin Kit
Yes they do. Early 70's and older 1/2 ton were open knuckle KINGPIN, not balljoint.70_F100 wrote:D44 doesn't have kingpins.
That MAY be your problem in searching for what you're looking for.
The kingpins or caps are usually fine, you probably just need the trunnion bearings and races to replace ones that are toast.
1970 F-250 4x4 original Willock swivel frame chassis '93 5.9 Cummins/Getrag/NP205/HP60/D70
-
70_F100
- Moderator
- Posts: 2999
- Joined: Mon Oct 22, 2007 11:23 am
- Location: North Carolina, Kernersville
Re: F100 67 4WD King Pin Kit
Sorry to disagree, but a kingpin goes from the top of the spindle to the bottom of the spindle, just a single steel rod.averagef250 wrote:Yes they do. Early 70's and older 1/2 ton were open knuckle KINGPIN, not balljoint.70_F100 wrote:D44 doesn't have kingpins.
That MAY be your problem in searching for what you're looking for.
The kingpins or caps are usually fine, you probably just need the trunnion bearings and races to replace ones that are toast.
On a 4x4, that's not possible.
Edit: I guess Dana called the top and bottom pins "kingpins".
Still, not a true "kingpin" by definition.
Wise men talk because they have something to say; fools talk because they have to say something.--Plato
Why is it that there's seldom time to fix it right the first time, but there's always time to fix it right the second time???
That's not an oil leak That's SWEAT from all that HORSEPOWER!!
Why is it that there's seldom time to fix it right the first time, but there's always time to fix it right the second time???
That's not an oil leak
That's SWEAT from all that HORSEPOWER!! -
Cortizzle88
- New Member
- Posts: 19
- Joined: Sat Oct 20, 2012 1:57 am
Re: F100 67 4WD King Pin Kit
I actually have a 1969 f100 4x4 with a high pinion Dana 44, coils, and the open kingpin style knuckles. I want to do an axle swap so I've got discs in the front. I wish I could just swap knuckles but that's apparently not possible as they switched to ball joints. My question is, what years are compatible? Is it the 1976-1979 f100s or broncos that have the front axle I need? any help would be much appreciated.