AOD TRANS

Bigblock514 · Post by **Bigblock514** » Mon Sep 13, 2010 10:07 pm

What I would like to know guys would a Aod trans work behind a late 70's model 460. If so what years should I be looking for? Any input would be helpful
thanks guys!

j41385 · Post by **j41385** » Wed Sep 15, 2010 10:38 pm

The Aod only came with a small block bell housing to my knowledge, but lentech has some pretty custom stuff where you can hook them to FE, Big Block, or even chevrolets. Or you could get the E4od and the baumann stand alone computer to run it.

Bigblock514 · Post by **Bigblock514** » Thu Sep 16, 2010 9:33 pm

hey thanks j41385 for the information. I'm going to look into it.

quantumleap · Post by **quantumleap** » Fri Sep 17, 2010 11:17 pm

can the aod be a floor shift auto? same question for a c6...maybe looking to convert from my t18 to an auto.

BobbyFord · Post by **BobbyFord** » Sat Sep 18, 2010 12:07 am

quantumleap wrote:can the aod be a floor shift auto? same question for a c6...maybe looking to convert from my t18 to an auto.

Anything can be fabbed. I have a '69 Mustang shifter on the floor of my '63 F100 Unibody. If you put the C6 in, why not just get an automatic column?

quantumleap · Post by **quantumleap** » Sat Sep 18, 2010 12:15 am

cause i got a floor shift column thats almost ready to go in the truck once i get my new tss...

quantumleap · Post by **quantumleap** » Sat Sep 18, 2010 12:16 am

and does the driveshaft need to be shortened during this conversion?

BobbyFord · Post by **BobbyFord** » Sat Sep 18, 2010 12:25 am

I'm not sure about the driveshaft length. Measure yours tomorrow and I'll see what mine is.

quantumleap · Post by **quantumleap** » Sat Sep 18, 2010 12:27 am

from yoke to yoke right?..then what else is need for the full conversion? cut the floor and change the pedal assembly?

The FORDification.com Forums

AOD TRANS

AOD TRANS

Re: AOD TRANS

Re: AOD TRANS

Re: AOD TRANS

Re: AOD TRANS

Re: AOD TRANS

Re: AOD TRANS

Re: AOD TRANS

Re: AOD TRANS