1967 F-100 project

67nukeford · Post by **67nukeford** » Thu Sep 10, 2009 4:48 pm

Oops, posted this in the wrong forum, so I'll repost here. Anyway, after ten years of waiting, finally getting her tore down. Here are a couple of before pics..

67nukeford · Post by **67nukeford** » Thu Sep 10, 2009 4:50 pm

Sheet metal removal..

67nukeford · Post by **67nukeford** » Fri Sep 11, 2009 11:42 am

Here are some pics of the I-6 300 coming out. Will be replaced with a 390, and I hope a 80'ish 5 speed and transfer case.

67nukeford · Post by **67nukeford** » Fri Sep 11, 2009 11:46 am

Cab all cleaned out and ready to pull. I'm probably going to replace the cab with a 68 or later, I have access to one, and I like the updated heater controls. This cab would need both floorboards replaced and rockers if I used it.

67nukeford · Post by **67nukeford** » Fri Sep 11, 2009 11:47 am

Driver's side floor, even worse.

neverdone · Post by **neverdone** » Fri Sep 11, 2009 9:39 pm

67nukeford wrote:Cab all cleaned out and ready to pull. I'm probably going to replace the cab with a 68 or later, I have access to one, and I like the updated heater controls. This cab would need both floorboards replaced and rockers if I used it.

any difference in a 67 cab?

67nukeford · Post by **67nukeford** » Mon Sep 14, 2009 9:34 am

No, the only difference is with the dash. Othwewise, I'm told they are virtually the same. I like the sliding heater controls on the 68 and up trucks, mine has just the pull knob controls in the 67. And I'm also thinking of putting in AC, so I'll need the newer setup.

neverdone · Post by **neverdone** » Mon Sep 14, 2009 10:32 pm

o gotcha....learn something everyday..good luck with the build

67nukeford · Post by **67nukeford** » Mon Sep 14, 2009 10:56 pm

Body is now off, thanks to my brother-in-law and his tractor.

67nukeford · Post by **67nukeford** » Mon Sep 14, 2009 10:57 pm

Now just have to get the suspension stripped, and get the frame and suspension ready for sandblasting and paint.

fordman · Post by **fordman** » Mon Sep 14, 2009 11:37 pm

would you take a pic of that steering box and the pitman arm and how it all hooks together with the linkage. a pic from the drivers side would be great.

67nukeford · Post by **67nukeford** » Tue Sep 15, 2009 4:41 pm

I may not get back out ot work on it for a few days, but I'd be glad to. I'll pm you when I have the pics!

fordman · Post by **fordman** » Tue Sep 15, 2009 7:12 pm

thank you i have been trying to get anyone to post a pic of this setup but so far no one has . thnak you.

67nukeford · Post by **67nukeford** » Wed Sep 16, 2009 8:33 am

I will stop out there tonight and get a pic for you, not a problem!

67nukeford · Post by **67nukeford** » Wed Sep 16, 2009 9:48 pm

Here are a couple of pics, let me know if you need anything else!

The FORDification.com Forums

1967 F-100 project

1967 F-100 project

Re: 1967 F-100 project

Re: 1967 F-100 project

Re: 1967 F-100 project

Re: 1967 F-100 project

Re: 1967 F-100 project

Re: 1967 F-100 project

Re: 1967 F-100 project

Re: 1967 F-100 project

Re: 1967 F-100 project

Re: 1967 F-100 project

Re: 1967 F-100 project

Re: 1967 F-100 project

Re: 1967 F-100 project

Re: 1967 F-100 project