Oil Pressure Sending Extension

bjde0b · Post by **bjde0b** » Fri Aug 28, 2009 5:08 pm

Gents - Need an oil sending unit extension. Mine is currently galvenized pipe and in my rebuild I would like an original extension that has the angled end for the oil pressure sending unit.

Do you know where I can get one under $25 online. I would like just a Doorman part for $10. If someone has one let me know.

fordman · Post by **fordman** » Fri Aug 28, 2009 10:51 pm

like this?

bjde0b · Post by **bjde0b** » Sat Aug 29, 2009 12:09 pm

I don't know if that will work, does anyone have that one installed on a 302 without clearance issues? It may work without a problem, I just don't know. The one I have been finding and the one in Tom Monroe's book is the one on page 100 of the NPD catalog.

http://npd.dirxion.com/WebProject.asp?BookCode=frd07flx#

fordman · Post by **fordman** » Sat Aug 29, 2009 2:38 pm

the one in the pics came from a 78 f150 with a 302 and a smallblock c6.

Happy_Camper · Post by **Happy_Camper** » Sat Aug 29, 2009 5:38 pm

$24.95 at National Parts Depot (www.npdlink.com). Or do the good old Junk yard crawl, probably get it for a couple of bucks that way.

The FORDification.com Forums

Oil Pressure Sending Extension

Oil Pressure Sending Extension

Re: Oil Pressure Sending Extension

Re: Oil Pressure Sending Extension

Re: Oil Pressure Sending Extension

Re: Oil Pressure Sending Extension