68 240 6 1 barrel card.
Not sure what brand it is.
How can I find a schematic or parts breakdown for this carb.
carb problem
Moderators: Ranchero50, DuckRyder
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
Re: carb problem
when you buy a carb kit for it the instructions will have a diagram for the whole carb inside the box. you can also go to the local library and look in the mitchel manauls and so forth for the same diagrams.
-
- Blue Oval Fan
- Posts: 628
- Joined: Tue Jul 20, 2004 2:52 am
- Location: Texas, Houston
- Contact:
Re: carb problem
Gotta ID it first.. I think most were Carter YF carbs. Both mine with sixes use
the YF. Does it look about like this one?
http://www.tocmp.com/manuals/Carbs/Cart ... 12_jpg.htm
If so, it's a YF. There will be minor variations through the years, but I think most
of the rebuild kits will work for most all of them.
They are easy to rebuild. Probably one of the easiest you could find.
Not much to em..
the YF. Does it look about like this one?
http://www.tocmp.com/manuals/Carbs/Cart ... 12_jpg.htm
If so, it's a YF. There will be minor variations through the years, but I think most
of the rebuild kits will work for most all of them.
They are easy to rebuild. Probably one of the easiest you could find.
Not much to em..
1968 F-250 / 300 six / T-18
Dana 60 - 4.10 Limited Slip
Dana 60 - 4.10 Limited Slip
-
- New Member
- Posts: 7
- Joined: Mon Jul 06, 2009 9:42 am
Re: carb problem
Thanks guys for the help