I converted my 1970 F250 from a 2BBL to a 4BBl carb. Now my linkage is too short . Does any one have a Pic of how there 4 BBL is hooked up or what they used to modify there conversion? Its a autolite 4100.. I got a heck of a deal on the intakemanifold and carb. $60.00.. . I couldn't resist converting it over. It should run like a raped ape when I get everthing hooked up!! Thanks for all the info and input it is greatly appreciated.
Semperfi,
Marine6212
converted 2bbl to 4bbl need help with linkage??
Moderators: Ranchero50, DuckRyder
- marine6212
- New Member
- Posts: 63
- Joined: Sun Jan 27, 2008 7:49 pm
- Location: Warner Robins,GA
converted 2bbl to 4bbl need help with linkage??
We all came together, both young and old.
To fight for our freedom, to stand and be bold.
In the midst of all evil, we stand our ground.
And we protect our country from all terror around. Peace and not war, is what some people say. But I'll give my life, so you can live the American way. I give you the right to talk of your peace. To stand in your groups, and protest in our streets. But still I fight on, I don't bitch, I don't whine.
To fight for our freedom, to stand and be bold.
In the midst of all evil, we stand our ground.
And we protect our country from all terror around. Peace and not war, is what some people say. But I'll give my life, so you can live the American way. I give you the right to talk of your peace. To stand in your groups, and protest in our streets. But still I fight on, I don't bitch, I don't whine.
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
Re: converted 2bbl to 4bbl need help with linkage??
you can probably use just a straight rod to the pedal from the carb. i think thats what a lot of guys are doing.
- sideoilerfe
- Blue Oval Fanatic
- Posts: 804
- Joined: Tue Sep 11, 2007 10:04 pm
- Location: Oregon, Portland
Re: converted 2bbl to 4bbl need help with linkage??
You'll have to make the linkage longer with the 4V carb. They sit farther forward than the 2V as you know. I took a straight rod and just lengthened it about 2 inches.
Side oiler FE, see if you can catch me!!!
1970 F250 4x4 390/4spd
1968 F250 4X2 360/C6/No Rust!
1970 F250 4x4 390/4spd
1968 F250 4X2 360/C6/No Rust!
- marine6212
- New Member
- Posts: 63
- Joined: Sun Jan 27, 2008 7:49 pm
- Location: Warner Robins,GA
Re: converted 2bbl to 4bbl need help with linkage??
Thanks for the info. I just took some safety wire and twisted it up for now so that I can move the truck around the yard..
I still need a exhaust from the manifolds back. Man is that 390 loud with open manifolds. Does any one have a good internet site that I can order a exhaust from thats under $200 + shipping?
Semperfi,
Marine6212
I still need a exhaust from the manifolds back. Man is that 390 loud with open manifolds. Does any one have a good internet site that I can order a exhaust from thats under $200 + shipping?
Semperfi,
Marine6212
We all came together, both young and old.
To fight for our freedom, to stand and be bold.
In the midst of all evil, we stand our ground.
And we protect our country from all terror around. Peace and not war, is what some people say. But I'll give my life, so you can live the American way. I give you the right to talk of your peace. To stand in your groups, and protest in our streets. But still I fight on, I don't bitch, I don't whine.
To fight for our freedom, to stand and be bold.
In the midst of all evil, we stand our ground.
And we protect our country from all terror around. Peace and not war, is what some people say. But I'll give my life, so you can live the American way. I give you the right to talk of your peace. To stand in your groups, and protest in our streets. But still I fight on, I don't bitch, I don't whine.
- sideoilerfe
- Blue Oval Fanatic
- Posts: 804
- Joined: Tue Sep 11, 2007 10:04 pm
- Location: Oregon, Portland
Re: converted 2bbl to 4bbl need help with linkage??
You're gonna have to pay alot more than that for good exhaust. You could make a system if you had a welder.marine6212 wrote: Does any one have a good internet site that I can order a exhaust from thats under $200 + shipping?
http://www.napaonline.com/masterpages/N ... haust+Pipe
http://www.napaonline.com/masterpages/N ... haust+Pipe
Then buy your choice of muffler and make a tailpipe out of the elbows and strait pieces they sell at the auto parts store for a reasonable cost.
Side oiler FE, see if you can catch me!!!
1970 F250 4x4 390/4spd
1968 F250 4X2 360/C6/No Rust!
1970 F250 4x4 390/4spd
1968 F250 4X2 360/C6/No Rust!