390 oil capacity
Moderators: Ranchero50, DuckRyder
-
- Preferred User
- Posts: 391
- Joined: Thu Apr 03, 2008 3:09 pm
- Location: Orlando,FL.
390 oil capacity
what is the amount of oil my 390 truck engine holds with filter. My owners manual says Approx. Caps. 5 qrts. *add 1 qrt. with filter change. Does that mean 6qrts total ?
- BRUTUS_T_HOG
- Preferred User
- Posts: 433
- Joined: Sun Mar 16, 2008 8:48 pm
- Location: Rainier, OR
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
Re: 390 oil capacity
buy 6 but only use 5 until you have started it and ran it for a few minutes. and then check it again. it may only end up being 5 1/2.
- sideoilerfe
- Blue Oval Fanatic
- Posts: 804
- Joined: Tue Sep 11, 2007 10:04 pm
- Location: Oregon, Portland
Re: 390 oil capacity
5 qts including filter on a 4x2. I've had 4 4x2 FE powered trucks and they all take 4 in the pan + 1 for the filter.
Side oiler FE, see if you can catch me!!!
1970 F250 4x4 390/4spd
1968 F250 4X2 360/C6/No Rust!
1970 F250 4x4 390/4spd
1968 F250 4X2 360/C6/No Rust!
-
- Preferred User
- Posts: 391
- Joined: Thu Apr 03, 2008 3:09 pm
- Location: Orlando,FL.
Re: 390 oil capacity
Thanks for the info sideoilerfe I have been using 4 quarts +1 for filter for 38 years and did'nt have any trouble,the dipstick read full. A buddy of mine was the one who said it takes 6 quarts, he said the car 390 takes 5 quarts.
- sideoilerfe
- Blue Oval Fanatic
- Posts: 804
- Joined: Tue Sep 11, 2007 10:04 pm
- Location: Oregon, Portland
Re: 390 oil capacity
It all depends on the size of the pan. The FE 4x4 pans are deeper so they take more. I've been using 6 1/2 in my 4x4 for 14 years but like you, my 4x2's are 5 total.
Side oiler FE, see if you can catch me!!!
1970 F250 4x4 390/4spd
1968 F250 4X2 360/C6/No Rust!
1970 F250 4x4 390/4spd
1968 F250 4X2 360/C6/No Rust!