Stock exhaust
Moderators: Ranchero50, DuckRyder
-
- New Member
- Posts: 6
- Joined: Sat May 23, 2009 6:12 am
Stock exhaust
Where are you guys getting your stock exhaust from (if there is such a place)? It looks like autozone stocks the muffler and tailpipe online, but the tailpipe is only for the short beds...
1972 Ford F-100 Explorer, 302 Spd
1948 Ford F-1 pickup, original Flathead
1948 Ford F-1 pickup, original Flathead
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
Re: Stock exhaust
amuffler shop can make them for you. . have you checked the links page? www.fordification.com/links.htm
soem of the vendors may have the pipes you are looking for.
soem of the vendors may have the pipes you are looking for.
-
- New Member
- Posts: 6
- Joined: Sat May 23, 2009 6:12 am
Re: Stock exhaust
Hmm...if it comes down to an exhaust shop...I might as well get a nice set of duals...I was just thinking on an interim basis.
1972 Ford F-100 Explorer, 302 Spd
1948 Ford F-1 pickup, original Flathead
1948 Ford F-1 pickup, original Flathead
- sideoilerfe
- Blue Oval Fanatic
- Posts: 804
- Joined: Tue Sep 11, 2007 10:04 pm
- Location: Oregon, Portland
Re: Stock exhaust
http://www.napaonline.com/MasterPages/N ... haust+Pipe
http://www.napaonline.com/MasterPages/N ... haust+Pipe
http://www.napaonline.com/MasterPages/N ... oundmaster
http://www.napaonline.com/MasterPages/N ... =Tail+Pipe
This works good. You didn't say what motor you had so i just assumed you had a 360/390. I have a system like this except I used a different muffler with a 2.5" in/out and made my own 2.5" tail pipe.
http://www.napaonline.com/MasterPages/N ... haust+Pipe
http://www.napaonline.com/MasterPages/N ... oundmaster
http://www.napaonline.com/MasterPages/N ... =Tail+Pipe
This works good. You didn't say what motor you had so i just assumed you had a 360/390. I have a system like this except I used a different muffler with a 2.5" in/out and made my own 2.5" tail pipe.
Side oiler FE, see if you can catch me!!!
1970 F250 4x4 390/4spd
1968 F250 4X2 360/C6/No Rust!
1970 F250 4x4 390/4spd
1968 F250 4X2 360/C6/No Rust!
-
- New Member
- Posts: 6
- Joined: Sat May 23, 2009 6:12 am
Re: Stock exhaust
I have the 302...but I bet the muffler and tailpipe would work, which is all i really need. Thanks
1972 Ford F-100 Explorer, 302 Spd
1948 Ford F-1 pickup, original Flathead
1948 Ford F-1 pickup, original Flathead