PCV hose, breather hose replacement??

[JG F100]

What are most of you guys doing when the breather hose from the valve cover to the carb base disintegrates and breaks into pieces after pulling it off? I was prepping and cleaning and thought I could get a new one from the local auto parts, but no luck. I'm tempted to put a heater hose on there but dont think it would hold or would kink. Is there another vehicle part number that works?

Thanks

[fordman]

i am pretty sure you can still get the molded hose for it but i dont remember where at. you can use a fuel line hose to make it work for now. i think 3/8 woul dbe better than 1/2 because it would stay on and not blow off.

[ToughOldFord]

If he's talking about using heater hose then I'm assuming he's referring to the breather hose from the air cleaner to the oil fill cap. If that's the case then I think heater hose should work fine, there's no real stress on that hose in it's function.

As far as PCV goes, here's how I did mine:

Chunk Long