302 Alternator Bracket

Engine, ignition, fuel, cooling, exhaust

Moderators: Ranchero50, DuckRyder

Post Reply
cjhall
New Member
New Member
Posts: 32
Joined: Thu Feb 07, 2008 12:09 am
Location: Nor Cal

302 Alternator Bracket

Post by cjhall »

Due to an electronic snafu, (I screwed up :oops:), I have lost some of my reference pictures on my 302 rebuild. I cannot remember how the lower alternator bracket is attached to the block. Could some one please post a picture or a real good description of how it goes?

Thanks,

Chris
FordTruck
Blue Oval Guru
Blue Oval Guru
Posts: 1160
Joined: Wed Aug 15, 2007 4:47 pm
Location: The GREAT State Of Missouri
Contact:

Re: 302 Alternator Bracket

Post by FordTruck »

Here's a couple pic of the one on my 70. Sorry there kinda bad pictures because I don't have any hood hinges so its kinda hard to get motor pictures. I can get better ones tommrrow.

Image

Image
"Flyin High On Caffine And Copenhagen" R.I.P Chris LeDoux

60 Mercury Comet
65 Ford Econoline
72 Ford F100 on 79 4x4 SWB frame
77 Ford F250 "lowboy" 4x4
09 Harley Xl1200c
cjhall
New Member
New Member
Posts: 32
Joined: Thu Feb 07, 2008 12:09 am
Location: Nor Cal

Re: 302 Alternator Bracket

Post by cjhall »

Thanks for the pics. It looks like the lower bracket is attached to the upper bracket at its lowest mounting hole. Is that correct?

Again, thanks for the pictures.

Chris
fordman
100% FORDified!
100% FORDified!
Posts: 22329
Joined: Sun Aug 28, 2005 8:17 pm
Location: Kansas, Ottawa
Contact:

Re: 302 Alternator Bracket

Post by fordman »

no they are seperate. you can also swap those brackets from place to place and have the alternator sit higher than the low spot.
Post Reply