Foot Feed linkage

Engine, ignition, fuel, cooling, exhaust

Moderators: Ranchero50, DuckRyder

Post Reply
User avatar
Merlin68F100
New Member
New Member
Posts: 142
Joined: Mon Aug 09, 2004 2:38 pm
Location: Austell, Georgia
Contact:

Foot Feed linkage

Post by Merlin68F100 »

While checking my auto trans fluid I noticed for the first time the foot feed linkage on my stock 68 360 2barrel w/manual choke. What a Rube Goldberg POS this is. When it does fall apart, and I cannot understad what is holding it together now, what sort of upgrade modifications has been done? I don't need NASCAR certified high voltage fly by wire, but something with positive foot feed back would be nice.
"A point in every direction is the same as no point at all."
The Pointless Man
fordman
100% FORDified!
100% FORDified!
Posts: 22329
Joined: Sun Aug 28, 2005 8:17 pm
Location: Kansas, Ottawa
Contact:

Re: Foot Feed linkage

Post by fordman »

just a straight rod from the pedal to the carb. they can be had at the parts stores. its got a hook for the pedal on on end and a snap linkage piece ont he other end for th carb. or whihc ever end you need they have them. i have personally never had a problem with the trapeze setups. its all held together with pins.
User avatar
FORDification
Site & Forum Admin
Site & Forum Admin
Posts: 8050
Joined: Sun Jul 11, 2004 12:52 am
Location: Kansas, Wellsville
Contact:

Re: Foot Feed linkage

Post by FORDification »

Ford did away with the trapeze in the dentside era, just using a straight rod from the gas pedal to the carb. They're easy enough to find in the U-Pull-Its.

Image
____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
ImageImageImage
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
Post Reply