FE head casting #'s
Moderators: Ranchero50, DuckRyder
-
Texas69
- New Member
- Posts: 41
- Joined: Thu Aug 10, 2006 10:53 am
- Location: Austin
FE head casting #'s
Can some one give ma list of good casting #'s for FE heads, it is for a 390?
1969 F100 Ranger shortbed 360 3 on tree.
-
DuckRyder
- Moderator
- Posts: 4925
- Joined: Mon Jul 19, 2004 3:04 pm
- Location: Scruffy City
- Contact:
re: FE head casting #'s
There are quite a few...
In fact, for a normal streetable 390 most 390 heads are fine, the very common C8AE-H and D2TE-AA heads are quite good.
The answer to your question also depends to an extent on the chassis you are putting the motor in... we will assume it is a truck...
In fact, for a normal streetable 390 most 390 heads are fine, the very common C8AE-H and D2TE-AA heads are quite good.
The answer to your question also depends to an extent on the chassis you are putting the motor in... we will assume it is a truck...
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
-
Texas69
- New Member
- Posts: 41
- Joined: Thu Aug 10, 2006 10:53 am
- Location: Austin
re: FE head casting #'s
thanks Duckryder. Yes in my 69 F100. I will going to a swap meet and junk yards this weekend to look for some.
1969 F100 Ranger shortbed 360 3 on tree.