3-point seatbelt question.

jzjames · Post by **jzjames** » Sat Apr 23, 2005 5:32 pm

Ok to revisit this question? the bolt holes on the upper rear cab points is either tapped - or can be tapped, from what I understand. I havent solved the question of which belts from which vehicles work best to install. I sure would like to provide my passengers with a nice retractable 3-point belt system. What's the consencus?? Jay

4x4x4crewcab · Post by **4x4x4crewcab** » Sat Apr 23, 2005 6:21 pm

I can't tell you what would work the best but I do believe the holes are tapped and I can show you what a factory shoulder belt looks like

4x4x4crewcab · Post by **4x4x4crewcab** » Sat Apr 23, 2005 6:23 pm

Another shot trucks with factory shoulder belt will have dual buckles

71-F-250SC-72-F-250C · Tue Apr 26, 2005 8:45 pm

The holes in my cab were not tapped at all I had to tap them, which was no big deal. The shoulder harness belts installed in my truck are not comfortable, but I suppose they'll get the job done.

The FORDification.com Forums

3-point seatbelt question.

3-point seatbelt question.

re: 3-point seatbelt question.

re: 3-point seatbelt question.

re: 3-point seatbelt question.