MIdWestern MNG

nikon4u · Post by **nikon4u** » Thu Feb 15, 2007 11:29 pm

67F250CS
Let me know if you want some help. This is right up my alley. I have EVERY tool you would need and I can do framing, electrical, and plumbing. Check out the link to my web site if you're interested or just let me know.

ezernut9mm · Post by **ezernut9mm** » Thu Feb 15, 2007 11:52 pm

foghorn wrote:but it's kinda hard to park a semi on a two lane safely.

Thats a big 10-4 on safely parking on 2 lane highways

Foggy

10 yrs ata safe driving and it's gonna stay that way.

ezernut9mm · Post by **ezernut9mm** » Thu Feb 15, 2007 11:53 pm

nikon4u wrote:67F250CS
Let me know if you want some help. This is right up my alley. I have EVERY tool you would need and I can do framing, electrical, and plumbing. Check out the link to my web site if you're interested or just let me know.

where in kc are you located? just curious.

nikon4u · Post by **nikon4u** » Fri Feb 16, 2007 7:52 am

Right here in Raytown, near 63rd and Raytown Road. And you?

ezernut9mm · Post by **ezernut9mm** » Thu Feb 22, 2007 11:38 pm

nikon4u wrote:Right here in Raytown, near 63rd and Raytown Road. And you?

in the northland @ the i-29/35 split. i know where 63rd and raytown is. i jump off there regularly to hit the "pepsi hole" at 63rd and manchester to make pickups for work.

the 14th of april is getting close! robert-i need to send you half the reg $$$ pm me a mailing addy so i can get it to you. i'm also going to wallymart this weekend to get an canopy so we don't get sunstroke or rainwashed. do you know the dimensions of the vendors space we are getting? it's getting close guys!!!! let's make this happen.

fordman · Post by **fordman** » Fri Feb 23, 2007 12:19 am

i'm ready i think. if i wer to bring engines and transmissions how would i get them in to the spot?would i want to bring my truck in and leave it or would i have to unload it? i am thinking of bringing that 6 cyl up to get rid of it. and maybe that c6 i have

ezernut9mm · Post by **ezernut9mm** » Fri Feb 23, 2007 12:26 am

fordman wrote:i'm ready i think. if i wer to bring engines and transmissions how would i get them in to the spot?would i want to bring my truck in and leave it or would i have to unload it? i am thinking of bringing that 6 cyl up to get rid of it. and maybe that c6 i have

i'm not totally sure craig, but that's why the set up is on fri afternoon. we should be able to drive up to our spots and unload. if i remember right lots of people were vending right out of the backs of their trucks. so who ever has the most bulky/heavy parts could maybe be the "anchor" truck.
i really think we should have a pre meet meeting to get all the particulars worked out.

foghorn · Post by **foghorn** » Fri Feb 23, 2007 6:59 am

I know im gonna have a decent bach of sheet metal im bringing. I also need to get busy taking this truck apart to bring the items im bringing. I already sold the bed off of it to a guy here that did some work to the wifes car.

Foggy

nikon4u · Post by **nikon4u** » Fri Feb 23, 2007 8:03 am

I might be able to bring an engine hoist, unless someone else has one they're bringing.

EZ- if you're near here this weekend, let me know.

rjewkes · Post by **rjewkes** » Fri Feb 23, 2007 8:00 pm

Thjere is a racetrack for greyhounds there and i think there might be a drag strip asomewhere near by?

fordman · Post by **fordman** » Fri Feb 23, 2007 10:33 pm

scott the premeet thing sound like the thing to do. foghorn are you bringing any good inners or front fenders up? if so i will be looking at them.

foghorn · Post by **foghorn** » Fri Feb 23, 2007 11:17 pm

I belive they are in very useable shape. I will know more when i get time to start taking it apart. I will also make it a point to go look before hand to let you know. This is either a 68 or 69 will look to make sure what it is. I havent made up my mind but i might be keeping the passenger fender for mine still debating on it.

Foggy

Mohillbilly · Post by **Mohillbilly** » Fri Feb 23, 2007 11:32 pm

ezernut9mm wrote: i really think we should have a pre meet meeting to get all the particulars worked out.

Perhaps we could utilize the chat site that Keith set up for an online meeting. Perhaps a little chat-net say every couple weeks or so?

fordman · Post by **fordman** » Fri Feb 23, 2007 11:52 pm

the passenger side is the last one i need. i guess we'll see come april.

nikon4u · Post by **nikon4u** » Sat Feb 24, 2007 3:18 pm

Were you guys interested in my post about the engine hoist?

The FORDification.com Forums

MIdWestern MNG

Re: re: MIdWestern MNG

re: MIdWestern MNG

re: MIdWestern MNG