B termanal

splavin90 · Post by **splavin90** » Wed Nov 01, 2006 2:51 am

whats the b termanal on my starter solenoid do? should it be hooked up?

right now i have it so that there's the S termanal is switched on and off by a switch in my truck. and my B termanal isn't hooked up.

good? bad? doesn't matter?

fordman · Post by **fordman** » Wed Nov 01, 2006 10:41 am

there should be only one wire to the starter and that is the wire from the back side of the solinoid. unless you have a mini statre then it will be different

68F250 · Post by **68F250** » Thu Nov 02, 2006 12:13 am

"B"? I thought it was an "I".

67F250CS · Post by **67F250CS** » Thu Nov 02, 2006 7:36 pm

http://www.fordification.com/wiring.htm

Take a look at the wiring harness photos that Keith has archived for us.
They always have answered my questions.

splavin90 · Post by **splavin90** » Fri Nov 03, 2006 6:13 pm

here's what i mean-

http://img.photobucket.com/albums/v113/ ... /relay.jpg

the wire and termanal i have circled, what is it, and should i have it hooked up?

fordman · Post by **fordman** » Fri Nov 03, 2006 6:22 pm

it should be laying there what isnt hooked up thats the wire that needs to go on there. the brown one goes on the front terminal and i think it red or yellow that goes on the other. it should be in the full scehmatics for your year of truck.

68F250 · Post by **68F250** » Fri Nov 03, 2006 6:53 pm

Yeah, that's the brown wire.

It's the ignition resistor bypass so the coil gets full battery voltage when the engine cranks over.

The FORDification.com Forums

B termanal

B termanal

re: B termanal

re: B termanal

re: B termanal

re: B termanal