Hi guys..
I have a new(reman) steering box and pump all hooked up. Question is, do I need to do anything when I put fluid in for the first time? ...like purging the air in the lines and if so, how would I do it? I have autozone power steering fluid but I also have type F ATF.
Thanks
Ron
All new power steering
Moderator: FORDification
- Ron_Hall
- New Member
- Posts: 214
- Joined: Sat Oct 22, 2016 2:59 am
- Location: Reno, NV
All new power steering
1971 F100 SWB 390 FE - bored.030 over
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
- 1972hiboy
- 100% FORDified!
- Posts: 2421
- Joined: Thu Sep 09, 2010 5:44 pm
- Location: California, Santa Cruz
Re: All new power steering
typically I get the front up on jacks, add some fluid get it running turn the wheel lock to lock and keep adding until the level stabilizes, prob repeat several times until you get most air out. it if gets foamy at the end let the truck sit for a hour or so then come back to it.
Rich
1973 f350 super c/s 460/c6 22k orig miles
1972 f350 srw crewcab special 390
1972 f250 4x4 sport custom 390fe Red
1972 f250 4x4 custom 360 FE " Ranger Ric"
1972 f250 4x4 custom 84k og miles 390
1971 f250 4x4 sport custom 56k og miles. 360
1970 f250 4x4 428 fe hp60 205 d60
Dont eat yellow snow.....
1973 f350 super c/s 460/c6 22k orig miles
1972 f350 srw crewcab special 390
1972 f250 4x4 sport custom 390fe Red
1972 f250 4x4 custom 360 FE " Ranger Ric"
1972 f250 4x4 custom 84k og miles 390
1971 f250 4x4 sport custom 56k og miles. 360
1970 f250 4x4 428 fe hp60 205 d60
Dont eat yellow snow.....
- Ron_Hall
- New Member
- Posts: 214
- Joined: Sat Oct 22, 2016 2:59 am
- Location: Reno, NV
Re: All new power steering
Thanks Rich, will give a try this week.1972hiboy wrote:typically I get the front up on jacks, add some fluid get it running turn the wheel lock to lock and keep adding until the level stabilizes, prob repeat several times until you get most air out. it if gets foamy at the end let the truck sit for a hour or so then come back to it.
ps... you ever make it to Reno?
Ron
1971 F100 SWB 390 FE - bored.030 over
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
- 1972hiboy
- 100% FORDified!
- Posts: 2421
- Joined: Thu Sep 09, 2010 5:44 pm
- Location: California, Santa Cruz
Re: All new power steering
Not insanely often. My work has a location in Reno though so i have always wanted to peak in there. Last time I was though that way was a few years ago on my way to to my property in elko. Nice halfway point.Ron_Hall wrote:Thanks Rich, will give a try this week.1972hiboy wrote:typically I get the front up on jacks, add some fluid get it running turn the wheel lock to lock and keep adding until the level stabilizes, prob repeat several times until you get most air out. it if gets foamy at the end let the truck sit for a hour or so then come back to it.
ps... you ever make it to Reno?
Ron
Rich
1973 f350 super c/s 460/c6 22k orig miles
1972 f350 srw crewcab special 390
1972 f250 4x4 sport custom 390fe Red
1972 f250 4x4 custom 360 FE " Ranger Ric"
1972 f250 4x4 custom 84k og miles 390
1971 f250 4x4 sport custom 56k og miles. 360
1970 f250 4x4 428 fe hp60 205 d60
Dont eat yellow snow.....
1973 f350 super c/s 460/c6 22k orig miles
1972 f350 srw crewcab special 390
1972 f250 4x4 sport custom 390fe Red
1972 f250 4x4 custom 360 FE " Ranger Ric"
1972 f250 4x4 custom 84k og miles 390
1971 f250 4x4 sport custom 56k og miles. 360
1970 f250 4x4 428 fe hp60 205 d60
Dont eat yellow snow.....
- Ron_Hall
- New Member
- Posts: 214
- Joined: Sat Oct 22, 2016 2:59 am
- Location: Reno, NV
Re: All new power steering
Well if you do give me a shout and we can meet up say hi.(I live and mile and a half from Summit)1972hiboy wrote:Not insanely often. My work has a location in Reno though so i have always wanted to peak in there. Last time I was though that way was a few years ago on my way to to my property in elko. Nice halfway point.Ron_Hall wrote:Thanks Rich, will give a try this week.1972hiboy wrote:typically I get the front up on jacks, add some fluid get it running turn the wheel lock to lock and keep adding until the level stabilizes, prob repeat several times until you get most air out. it if gets foamy at the end let the truck sit for a hour or so then come back to it.
ps... you ever make it to Reno?
Ron
Ron
1971 F100 SWB 390 FE - bored.030 over
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...