I have a 67 f 100, I found a set of DJM drop beams for 65-72 but I have changed my original beams to 78 beams with disc brakes. Can I use my disc brakes on these DJM beams?
Thanks, jim
Drop beam ?
Moderator: FORDification
-
- Preferred User
- Posts: 327
- Joined: Sat Oct 10, 2015 11:09 pm
- Location: Middle Georgia
Re: Drop beam ?
Don't know if there's been any changes in DJM's beams over time, but this is directly from their site.
On DJM site and this sites tech library they are listed as being for 65-79 trucks.These King Pin beams drop the front of your F-100 3″. They fit all F-100′s from 1965 to 1979 doesn't matter if you have drum or disc brakes. If you have drum brakes and you want to upgrade to discs (very popular) all you have to do is use the disc brake spindle and king pins with these beams and away you go.
1968 F-100 4x4 long bed - 360 FE - NP435 w/ Dana 21 - PS & PB conversion - Front Disc Swap - 265/75R16 - 1" S.L. & 2" B.L. (to be removed) - Homemade tube bumpers - Warn 8274 - Currently wearing 1970 body
- HIO Silver
- 100% FORDified!
- Posts: 1970
- Joined: Sat Jul 23, 2011 11:31 pm
- Location: Devil's Mountain, CA
Re: Drop beam ?
DJM used to have two PNs... 66-72 and 73-79. Now they just have one... no issues as far as I know.
I have DJM'S with 78 discs on my 70.
I have DJM'S with 78 discs on my 70.
70 F100 LB 2WD, 360FE, E-Street EFI, TKO-500, 76K original miles.. follow my rebuild: The Lo-Buck Bumpside
71 F250 LB, 2WD, 360FE, T18, PS, PB, D60 with 4.11s
73 F100 SB 4WD, 390FE, NP435, +4 on 35s
01 Ferrari 360 Spider F1
01 F150 SuperCrew Lariat 4WD
01 PT Cruiser Limited (DD)
68 Mustang
65 Mustang
71 F250 LB, 2WD, 360FE, T18, PS, PB, D60 with 4.11s
73 F100 SB 4WD, 390FE, NP435, +4 on 35s
01 Ferrari 360 Spider F1
01 F150 SuperCrew Lariat 4WD
01 PT Cruiser Limited (DD)
68 Mustang
65 Mustang