Steering wheels
Moderator: FORDification
-
fcatoem9
- New Member
- Posts: 3
- Joined: Tue May 20, 2014 8:09 am
Steering wheels
Can you use factory 68 f100 steering wheel on a 78 column?
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: Steering wheels
Seems like I remember the spline count and taper on both being the same when I did my tilt column in the 71'. I do believe there were clearance or gap issues with the hub of the wheel, (not matching or mating up properly / aesthetically)."fcatoem9"]Can you use factory 68 f100 steering wheel on a 78 column?
You might find your answer here too:
http://www.fordification.com/tech/tilt.htm
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4