clean sheet metal and chassis parts

Private parties only. No eBay/Craigslist listings.

Moderator: FORDification

Bill Ramsey
New Member
New Member
Posts: 114
Joined: Tue Sep 03, 2013 7:01 pm
Location: San Diego

clean sheet metal and chassis parts

Postby Bill Ramsey » Sun Sep 17, 2017 10:36 am

I have numerous fenders, a couple inner fenders, bumpers, hoods, doors, core supports, and parts chassis.

I can cut out crossmembers, cab supports or whatever is needed.

rear axles, leaf springs, coil springs, brake drums, aux gas tanks, cab gas tanks.

1967 cab, rusted drip rail area just above driver side, fixable, rest is pretty solid.

8' beds, can cut out patches if needed.

manual steering boxes.

running 360,(2) C6 transmissions

almost everything is from 67-69.

it would be difficult for me to ship large parts, I don't have a lot of time. if I can drop it off at post office or fedex or UPS then fine.

parts are in San Diego County.

NO windshields, disc brakes, grilles, tailgates. mirrors, power steering.

let me know what you need.

thanks,

User avatar
hdman90
New Member
New Member
Posts: 150
Joined: Thu Mar 19, 2015 8:34 am
Location: Erie, Pa
Contact:

Re: clean sheet metal and chassis parts

Postby hdman90 » Mon Sep 18, 2017 7:20 am

Private Message Sent
1969 F-100 LWB 2wd 240 3spd manual

User avatar
colnago
100% FORDified!
100% FORDified!
Posts: 1594
Joined: Tue Jun 14, 2011 8:48 pm
Location: Ridgecrest, CA

Re: clean sheet metal and chassis parts

Postby colnago » Mon Sep 18, 2017 11:09 am

I'm looking for the following for an F250:

- 8' passenger-side bed panel with the cutout for an underbed toolbox

- Dana 60 rear with 3.54 gearing

Joseph
"Sugar", my 1967 Ford F250 2WD Camper Special, 352FE, "T" Intake with 1405 Edelbrock, Duraspark II Ignition, C6 transmission, front disc brake conversion.

Bill Ramsey
New Member
New Member
Posts: 114
Joined: Tue Sep 03, 2013 7:01 pm
Location: San Diego

Re: clean sheet metal and chassis parts

Postby Bill Ramsey » Mon Sep 18, 2017 3:33 pm

colnago wrote:I'm looking for the following for an F250:

- 8' passenger-side bed panel with the cutout for an underbed toolbox

- Dana 60 rear with 3.54 gearing

Joseph


i just sold a bedside with the toolbox.

Ill check on the rear, Ill be home in a couple days. I may have it.

dftuttle
New Member
New Member
Posts: 27
Joined: Sun Dec 08, 2013 8:50 am
Location: California, Simi Valley

Re: clean sheet metal and chassis parts

Postby dftuttle » Sat Sep 23, 2017 9:33 pm

PM sent.
If common sense was really common, wouldn't everybody be using it?

Bill Ramsey
New Member
New Member
Posts: 114
Joined: Tue Sep 03, 2013 7:01 pm
Location: San Diego

Re: clean sheet metal and chassis parts

Postby Bill Ramsey » Sun Oct 01, 2017 4:48 pm

rear axles that i have are 3.73(2) and (1) 4.10


send me an email and i will reply with a zip file of pictures of what i have for sale at this time.
You do not have the required permissions to view the files attached to this post.


Return to “Parts for Sale/Trade”

Who is online

Users browsing this forum: No registered users